Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Discount Car Stereo Manuals
  4. Car Receiver
  5. BTH-JAG98R
  6. Install manual

Discount Car Stereo BTH-JAG98R Install Manual

Jaguar bluetooth 4.2 late 1997-06 xk x100 and 1998-03 xj x308 with cd changer
Hide thumbs

Advertisement

Quick Links

Download this manual
Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
BTH-JAG98R
QUICK START BLUETOOTH INSTALL GUIDE FOR LATE1997-06 XK (X100) AND 1998-03 XJ (X308 WITH CD CHANGER
Created June 9, 2020
Revised: January 3, 2025

Advertisement

loading
Need help?

Need help?

Do you have a question about the BTH-JAG98R and is the answer not in the manual?

Questions and answers

Related Manuals for Discount Car Stereo BTH-JAG98R

Summary of Contents for Discount Car Stereo BTH-JAG98R

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 BTH-JAG98R QUICK START BLUETOOTH INSTALL GUIDE FOR LATE1997-06 XK (X100) AND 1998-03 XJ (X308 WITH CD CHANGER Created June 9, 2020 Revised: January 3, 2025...
  • Page 2 Jaguar original radio and CD changer while enjoying Bluetooth features only available in newer cars. ALERT: 1. The BTH-JAG98R does NOT apply to 2000+ vehicles equipped with Alpine Premium I.C.E systems (e.g. LNF4170AA amplifier etc.). 2. The BTH-JAG98R installs behind the dash (radio removal required)
  • Page 3 Fig. 6 7. Lift radio over gear selector hub and remove from dash (See Fig. 7). Fig. 3 4. Lift finisher plate upwards and disconnect electrical plugs (See Fig. 4) Fig. 7 8. Disconnect CD Auto changer plug from radio as seen in Fig. 8 Fig.
  • Page 4 Fig. 9 10. Connect installation harness MALE plug (See Fig. 10) to radio “CD” socket vacated in step 8 Premium radio 10-pin plug Fig. 12 Fig. 10 RED wire (See Fig. 11) accessory power: 11. Tap/splice installation harness - Premium I.C.E accessory wire (White) at PIN 7 on radio’s 10-pin plug (See Standard radio 20-pin plug Fig.
  • Page 5 3. Optional: Drill a 15/64 or 1/4” hole in dash or panel, push aux jack shaft Retain CD playback: through and secure with nut (See Fig. 16) This is the default option that allows users to retain use of the 6-disc CD auto changer.
  • Page 6 Optional USB extension cable installation Note: 1. Optional 6 ft. USB dash mount extension cable is not required for operation, however it extends USB charging port (See Fig. 22) to dashboard, glovebox etc. The USB port supports charging only Drill a ¾” hole to dash or panel using a step drill bit or equivalent (See Fig. 20) As an alternative;...
  • Page 7 Pairing module Pairing varies among devices but basic steps are the same. This process is done upon initial install and will not have to be repeated Turn ignition and radio “ON” From your Bluetooth enabled device, turn the Bluetooth ON and search for Bluetooth devices.

  • Page 8: Feature Comparison Chart

    Feature comparison chart Bluetooth operation Turn ignition to “ACC” or “ON” Turn radio ON. Feature BTA-JAG98 BT45-JAG BTH-JAG98 BTH-JAG98R Press “CD” button on radio to switch to Bluetooth mode Requires CD changer ✓ ✓ ✓ ✓ Retains CD playback ✓...

  • Page 9: Frequently Asked Questions And Troubleshooting

    6. What is the vehicle application and where does audio module connect? Frequently asked questions & troubleshooting The BTH-JAG98R is specific to the following Jaguar vehicles and connects behind the dash (to radio Ai-NET connector) What is the difference between the BTH-JAG98 and BTH-JAG98R? 1998-99 (x308) Standard or premium I.C.E.
  • Page 10 For help email support@discountcarstereo.com © 1995-Jan-25 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.