Subscribe to Our Youtube Channel
Related Manuals for Discount Car Stereo BT3-CHRY98
Summary of Contents for Discount Car Stereo BT3-CHRY98
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 BT3-CHRY98 QUICK START BLUETOOTH INSTALL GUIDE FOR 1998-01 CHRYSLER RADIOS WITH CD-C BUTTON...
-
Page 2: Installation
Warning!! All compatible radios must have a “CD-C” button on faceplate and 8-pin (round) port on the rear. The BT3-CHRY98 is NOT compatible with radios with CD-C button and 10-pin (square) port on the rear (e.g. RAD radio sale code). -
Page 3: Usb Charging
4. Route microphone plug/cable (10 ft. long) down side pillar, under steering Pairing column and into radio cavity, 5. Connect microphone to module “MIC” input jack on module. (See Fig. 4) Pairing process varies among devices but basic steps are the same. This process is Wind noise (Convertibles) will negatively affect phone audio. -
Page 4: Bluetooth Operation
Bluetooth operation Turn ignition to “ACC” and turn the radio ON 2. Press “CD-C” button on radio to enter Bluetooth mode. The radio display will change to default CD changer mode: Disc x track x as seen in Fig. 7 Fig. - Page 5 •We recommend professional installation Email support@discountcarstereo.com © 1995-Aug-24 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Need help?
Do you have a question about the BT3-CHRY98 and is the answer not in the manual?
Questions and answers