Related Manuals for Discount Car Stereo BT2x-BKR
Summary of Contents for Discount Car Stereo BT2x-BKR
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 Created October 1, 2015 Revised: October 21, 2024...
- Page 2 Becker radios were standard equipment in many European luxury cars (e.g., Porsche, BMW, Mercedes, Land Rover, Ferrari etc.) and for those looking to upgrade to Bluetooth without changing the radio, we offer the new BT2x-BKR (formerly A2D-BKR) Bluetooth music streaming receiver. The Bt2x-BKR allows Becker radio owners to stream music application from smartphone without wires.
- Page 3 To install: 1. Connect optional T-harness BLUE plug (Fig. 4) to radio C-3 slot. 2. Reconnect factory BLUE plug to BLACK iso socket on T-harness. (See Fig. Note: T-harness required to retain radio cluster display (e.g., Ferrari) and/or factory Hands-fee option Fig.
- Page 4 Disconnect factory 8-pin BLACK plug from radio chamber A (See Fig. 7) BMW and Mercedes solid 16-pin plug Warning: BMW and Mercedes factory plug has a solid (molded) 16-pin speaker/power (A/B) plug. For these applications harness seen in Fig. 9 is included.
- Page 5 Radios with ☼ button: (i.e., BE6104) Enable AUX menu option : One important step in this process is to enable the AUX function within the radio menu. Most Becker radios are pre-programmed to recognize the CD Turn radio “ON” changer connection and because of that you must perform the following steps 2.
- Page 6 Nav Traffic radios Cascade Pro (e.g., BE7941) Press "radio" button to enter radio mode. Press "Navi" and "F10" simultaneously To activate the External Device mode Press "Next" until AUX input, Changer Res screen Turn radio ON. Press AUX to enable/disable. Press information button Turn right hand rotary control/push button OK counterclockwise until system settings appear at the top right of the display...
- Page 7 Becker DTM /High speed (e.g., BE-7892, BE7910) Pairing: Pairing process varies from Phone to Phone but basic steps are the same. This process is done upon initial install and will not have to be repeated Press Sound button for more than 2 seconds Turn Ignition and radio “ON”...
- Page 8 Operation Frequently asked questions & troubleshooting: Turn radio “ON” My vehicle has a CD changer. Does the BT2x-BKR work in vehicles with Note: Many Porsche, Ferrari and other radios can be turned ON without CD changer? placing key in ignition; however, for this module to power up; ignition YES;...
- Page 9 Email support@discountcarstereo.com © 1995-2024-10-21 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders...
Need help?
Do you have a question about the BT2x-BKR and is the answer not in the manual?
Questions and answers