PRODUCT SAFETY & DISCLAIMER READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY • This installation guide is provided as a GENERAL installation guide, some vehicles vary and may require additional steps. We do not accept responsibility for third party labor charges or modifications.
Page 3
Fig. 4 below brake lever Fig. 3 Ground wire to radio chassis Tap or connect Accessory RED wire to suitable 12V Accessory supply source in vehicle (e.g., fuse box etc.) Find suggestions below. Suggested 12V accessory supply options: 1. In 968: Left foot well Fuse box at Row C, Fuse 1 (7.5A/15A) 2.
Pairing Operation Pairing process varies among devices the but basic steps are the same. This Turn radio “ON” process is done upon initial install and will not have to be repeated. Press radio “CD/AUX” button repeatedly until “AUX MODE” is activated or press “AUX”...
Need help?
Do you have a question about the BTx-CDR30 and is the answer not in the manual?
Questions and answers