Chicco DUCATI RACE TRACK Manual page 10

components with holes under the sides of the corresponding components, and fit them together.
All the accessories of the racing track can be simply fitted by exercising pressure on the components.
To fit the accessories on the racing track, please refer to diagrams 2, 3, 4.
Racing the Bikes on the Track
• Switch on both the bike (see diagram 5) and the remote control (see diagram 6), after inserting
the batteries as indicated the FITTING AND/OR REPLACING BATTERIES section. To fit the batter-
ies into the bike, open the battery cover located at the front; to fit the batteries into the remote
control open the battery cover located at the bottom.
• Place the bike onto the racing track, inserting the wheels into the groove (diagram 7).
• Press the FORWARD button and play.
Pit Stop
To make the race more realistic, it is possible to stop at the pit by riding the bike along the access
lane. To stop the bike at the pit, it is sufficient to turn the knob indicated in diagram 8 to allow the
bike trough.
Off Track
To start playing directly on the floor without interrupting the race, it is sufficient to turn the knob
indicated in diagram 9. This will "open" the groves of the track and allow the bike to ride off track.
THIS PRODUCT IS APPROVED TO EU 2002/96/EC REGULATION.
The crossed bin symbol on the appliance indicates that the product, at the end of its life,
must be disposed of separately from domestic waste, either by taking it to a separate waste
disposal site for electric and electronic appliances or by returning it to your dealer when
you buy another similar appliance. The user is responsible for taking the appliance to a special waste
disposal site at the end of its life. If the disused appliance is collected correctly as separate waste,
it can be recycled, treated and disposed of ecologically; this avoids a negative impact on both the
environment and health, and contributes towards the recycling of the product's materials. For fur-
ther information regarding the waste disposal services available, contact your local waste disposal
agency or the shop where you bought the appliance.
Approved to RoHS n° 2002/95/EEC Regulation.
FITTING AND/OR REPLACING BATTERIES
• Batteries must only be fitted by an adult.
• To replace spent batteries: Loosen the screw on the battery compartment cover, with a screwdriver
and open the cover. Then remove the spent batteries and fit new ones, ensuring that they have
been fitted in the correct polarity, close the battery cover, and tighten the screw.
• Always keep batteries and tools out of reach of children.
• Always remove spent batteries from the toy to avoid the danger of leakage from the battery dam-
aging the product.
• Always remove the batteries if the toy will not be used for a long period of time.
• Only use alkaline batteries of the same type or equivalent to the type recommended for the cor-
rect function of this product.
10