LOGICOM L-ITE 506 HD Quick Start Manual page 7

7. Enable / Disable Bluetooth connection
NOTE: To limit your exposure to electromagnetic fields we recommend you disable Bluetooth when not in use.
In the settings, press
8. Reset
If you want to reset your smartphone, you can do a reset of data from the operating system Android™.
CAUTION: A reset data erase all your personal data, all contacts in your phone and the applications you have
installed. That is why we recommend that you make a backup of your data before starting the procedure. However
the information stored on the external memory card will not be erased.
To do a reset of the data, you have two options:
Reset the device by setting menu :
In Settings, click "Backup & reset", then "Factory data reset".
Click "Reset phone" and confirm "Erase everything".
The smartphone will turn off and on rebooting the system will reset.
Reset the device in "recovery mode":
Switch off your device and then hold the Volume "-" button and press the "On / Off" button. After 3 seconds,
the "Factory Mode" menu appears, release the buttons. This menu is not tactil. To navigate, use the Volume
"-" button to move. To validate an action, use the "On / Off" button. Select "Clear eMMC", follow Confirm,
the smartphone will turn off and on rebooting the system will reset.
to activate the Bluetooth. You can also activate this function from the notifications panel.
Press to turn on / off Bluetooth
Once the Wi- Fi enabled, the
appears in your notification bar
icon
7