Upgrading Or Replacing The Hard Drive Assembly - Alienware 7XM1F Mobile Manual

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

Upgrading or Replacing the Hard Drive Assembly

Your laptop is equipped with one hard drive socket.
Removing the Hard Drive
1. Follow the instructions in "Before You Begin" on page
2. Remove the battery (see "Replacing the Battery Pack" on page
3. Loosen the three captive screws on the hard drive assembly.
4. Using the pull-tab, slide and lift the hard drive assembly to disconnect it from the system
board connector.
5. Lift the hard-drive assembly out of the computer base.
66
56.
60).