Advertisement
Turn off your computer, unplug the power cord, and open the system cover.
Insert the XG-C100C network card into the PCI-E network slot, ensuring that it is completely seated on the slot.
Turn on your computer. Download the driver from: https://asus.me/XG-C100C
Follow the onscreen instruction to finish the driver installation.
Connect devices to the RJ-45 port on XG-C100C using Cat5e, Cat6, Cat6a or higher network cables.
Speed LED (Left LED / Dual color) | |
10G | Green |
5G / 2.5G / 1G / 100 M | Yellow |
Link / ACT LED (Right LED / Single color) | |
10G / 5G / 2.5G / 1G / 100M | Blinking Green (transferring/ receiving data) |
No Traffic | Green |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the XG-C100C V3 and is the answer not in the manual?
Questions and answers