Fotric AcouTherm V7MiX Series User Manual page 99

Acoutherm Imaging Camera User Manual
2) Compass:This setting is used to enable/disable the compass.
5.5.5 LED lamp as flash light
The acoutherm Imager LEDs can be used as a flash for digital cameras. If the
flash function is enabled, the Thermal Imager LED light will enable the flash function
when the trigger button is pressed to save the image. The Thermal Imager LED can
also be used as a flashlight by turning on the Thermal Imager LED from the main
screen drop-down menu.
99 /166