John JOSI-pro Instructions For Use Manual

Rehab buggy

Hide thumbs Also See for JOSI-pro:

Instructions for use manual (24 pages)

Instructions manual (36 pages)

Instructions for use manual (37 pages)

page of 27

/ 27
Bookmarks

Quick Links

Download this manual

for specialised trade and users

John GmbH

Ziddelrasen 1b

D-99830 Treffurt

Phone: +49 36923 8388-0

Fax: +49 36923 8388-10

E-mail: info@johngmbh.com

Internet: www.johngmbh.com

Rev: 01/01.2024

Instructions for use

JOSI-

Rehab buggy

Size

Size XS

Size S

Size M

Size L

WE MANUFACTURE IN GERMANY

pro

JOSI-pro

JPM-30001

JPM-30002

JPM-30003

JPM-30004

Overview Video

AL-JPM22-EN

Need help?

Do you have a question about the JOSI-pro and is the answer not in the manual?

Questions and answers

Summary of Contents for John JOSI-pro

Page 1 JPM-30001 Size S JPM-30002 Size M JPM-30003 Size L JPM-30004 Overview Video John GmbH Ziddelrasen 1b D-99830 Treffurt Phone: +49 36923 8388-0 Fax: +49 36923 8388-10 E-mail: info@johngmbh.com Internet: www.johngmbh.com WE MANUFACTURE IN GERMANY Rev: 01/01.2024 AL-JPM22-EN © John GmbH...
Page 2 Before using JOSI-pro please be sure to read this instruction manual with all notes. In this way, damage due to operating errors can be avoided and optimum use of JOSI-pro can be achieved.
Page 3 Always park JOSI-pro on horizontal surfaces and firmly apply the parking brake. Make sure that the person transported does not lean out of the JOSI-pro. There is a risk of tipping or flipping over. If necessary, arms and legs must be positioned additionally.
Page 4 Make sure that no parts hang out of the JOSI-pro during transport. Be sure to use the wrist safety line (see chapter Wrist safety line). All adjustments and readjustments - brakes, centre of gravity, belt adjustment, etc. - must be carried out by a specialist dealer.
Page 5 Building up JOSI- JOSI-pro can be stored stand-alone upstanding Remove strap 1) Open buckle Open the buckle and remove the strap around the bottom frame and the back that keeps the JOSI-pro together when folded. Rear wheels 1) Attach rear wheels A.
Page 6 Tilt-in-space). Transport lowering (optional) The transport lowering is optional and allows the buggy to be folded more compactly. The transport lowering can be retrofitted to JOSI-pro. 1) Raise seat frame Loosen the quick release. Lift the seat frame forward and push it all the way back to the stop (1-2-3-4).
Page 7 Unfold the back completely and lock it by pressing lightly in the direction of the arrow. Attention! Make sure that the lock is fully engaged. 3) Lower cover folding mechanism Close the lower covers for the folding mechanism using the Velcro fastener. © John GmbH Page 7/27...
Page 8 Adjust the ergonomic push handle using the push buttons (A). Attention! Lift JOSI-pro only by the frame. JOSI-pro must not be lifted by the push handle! Pay attention to the weight balance and do not hang heavy objects on the push handle that influence the centre of gravity.
Page 9 (art. no. JP-12810) is recommended from a user weight of 55 kg. Attention! The suspension must be adjusted in such a way that the spring is only slightly compressed (10 - 20%) when the user is at rest. © John GmbH Page 9/27...
Page 10 Anti-tip and tipping lever 1) Setting JOSI-pro is equipped with a combined adjustable anti-tip device (A) with an integrated tipping lever (B) Please note: The anti-tip device can be adjusted by pulling lock C. Attention! Always use the anti-tip device when using JOSI-pro.
Page 11 Front wheel 1) Available front wheels JOSI-pro can optionally be equipped with the following pneumatic wheels: 12.5" rigid front wheel 8" swivel wheel with locking function 8" swivel wheel Duo 12.5" Front wheel Pro with locking function Locking function: 1. Press the red button E to switch on the locking function.
Page 12 2. Adjust the back to the desired position. 3. Lock the quick release. Attention! Be sure to close both quick releases. Always use two anti-tippers for the backrest adjustment and the reclining position (see chapter Anti-tipper and tipping lever). © John GmbH Page 12/27...
Page 13 3) Adjusting the back belts Adjust the individual back straps to the desired position and close the zips again. Please note: The individual back straps can be adjusted to different lengths according to your wishes and body shape. © John GmbH Page 13/27...
Page 14 D. Place the back cushion against the back again. 21.2 Seat depth 1) Lift seat cushion Lift up the seat cushion. 2) Adjust seat depth Adjust the seat depth and press the cushion onto the Velcro fasteners. © John GmbH Page 14/27...
Page 15 (A). 3) Unhook belt connector Unhook the belts from the belt connector and pass them forward through the back. 4) Conduct belts Conduct the belts through the the desired passage slots and pull it through. © John GmbH Page 15/27...
Page 16 (front) to tighten the belt. 4) Belt adjuster closing A. Close the belt adjuster B. Fold the belts together and put the Velcro straps back on. C. Press the seat cushion onto the Velcro fasteners © John GmbH Page 16/27...
Page 17 2) Extend belt To extend the belt, press the release and pull the front of the strap. Please note: The belt can be opened by pressing the red button. © John GmbH Page 17/27...
Page 18 22.2 Pelvic belt / Chest shoulder belt / Seat trousers 1) Belt systems The following harness systems can be attached to the JOSI-pro: A. Chest shoulder belt B. Pelvic belt C. Seat trousers 2) Chest shoulder belt at the bottom and pelvic...
Page 19 The following extension accessories can each be attached to one of the zips (max. two at a time):  Extension for sun canopy  Mosquito net  Rain cover © John GmbH Page 19/27...
Page 20 4) Application as open bag To use as an open bag, open both zips and place the lid on the bottom of the bag. Bike option 1) JOSI-pro as bike trailer With the bike option – drawbar and track widening – JOSI-pro can also be used as bike trailer.
Page 21 2) Mounting drawbar Remove the front wheel and fit the bike drawbar to the JOSI-pro (see also chapter Front wheel adapter and wheel change). Attention! Ensure that the adapter is inserted correctly on the lower side of the holder (A).
Page 22 6) Safety bar The push handle of the JOSI-pro is to be turned completely forwards when cycling and therefore serves as a safety bar for the head. Achtung! The plastic hinges (A) must be engaged. The person transported must always wear a bike helmet.
Page 23 Useful life and long-term durability The usefull life of JOSI-pro is set by the manufacturer at 5 years. With regular and proper care, maintenance and repair by the manufacturer, the service life of JOSI-pro can be extended depending on the intensity of use.
Page 24 The guarantee conditions of the Decon electric drive (if mounted) can be found in the product manual. Reporting of serious incidents All serious incidents occurring in connection with the products must be reported to the manufacturer (John GmbH) and the competent authority. „Serious incident“ means any incident that directly or indirectly led, might have led or might lead to any of the following: the death of a patient, user or other person;...
Page 25 Seat angle approx. 10° - 30° approx. 10° - 30° approx. 10° - 30° approx. 10° - 30° Back angle approx. 110° - 160° approx. 110° - 160° approx. 110° - 160° approx. 110° - 160° © John GmbH Page 25/27...
Page 26 Type label The weather-resistant type label of the JOSI-pro is located on the frame underneath the footrest. If the type label is no longer legible, be sure to contact your specialist dealer so that a new type label can be requested from the manufacturer.
Page 27 John GmbH Ziddelrasen 1b - D-99830 Treffurt - Tel: +49 36923 8388-0 - Fax: +49 36923 8388-10 - info@johngmbh.com © John GmbH Page 27/27...

This manual is also suitable for:

Jpm-30001 Jpm-30002 Jpm-30003 Jpm-30004