Table of Contents
Advertisement
Quick Links
for specialised trade and users
John GmbH
Ziddelrasen 1b
D-99830 Treffurt
Phone: +49 36923 8388-0
Fax: +49 36923 8388-10
E-mail: info@johngmbh.com
Internet:
www.johngmbh.com
Rev: 01/06.2023
© John GmbH
Instructions for use
access
JOSI-
JOSI-
Rehab buggy
Size
JOSI-access
Size S
JA-30002
Size M
JA-30003
Size L
JA-30004
WE MANUFACTURE IN GERMANY
&
pro
JOSI-pro
JP-30002
JP-30003
JP-30004
AL-JPA22-EN
Advertisement
Table of Contents
Summary of Contents for John Josi-access
- Page 1 Size S JA-30002 JP-30002 Size M JA-30003 JP-30003 Size L JA-30004 JP-30004 John GmbH Ziddelrasen 1b D-99830 Treffurt Phone: +49 36923 8388-0 Fax: +49 36923 8388-10 E-mail: info@johngmbh.com Internet: www.johngmbh.com WE MANUFACTURE IN GERMANY Rev: 01/06.2023 AL-JPA22-EN © John GmbH...
-
Page 2: Table Of Contents
Type label ............................24 Introduction JOSI-access/JOSI-pro rehab buggy is a quality product from John GmbH. It is equipped with an integrated seat unit (upholstered cover), tilt-in-space and an optional back adjustment. Seat depth and lower leg length are infinitely adjustable. Furthermore, the seating system can be equipped with additional components (thoracic pads, headrest, seat cushion, etc.). -
Page 3: Intended Use
Always park JOSI-access/JOSI-pro on horizontal surfaces and firmly apply the parking brake. Make sure that the person transported does not lean out of the JOSI-access/JOSI-pro. There is a risk of tipping or flipping over. If necessary, arms and legs must be positioned additionally. -
Page 4: Transport In Vehicles
Use ramps or lifts. Stairs can only be climbed with the help of another person. Watch your fingers during adjustment and assembly work. Make sure that no parts hang out of the JOSI-access/JOSI-pro during transport. Be sure to use the wrist safety line (see chapter Wrist safety line). - Page 5 Loosen the quick release. Lift the seat frame forward and push it all the way back to the stop (1-2-3-4). Attention: Lock the parking brakes when operating the lowering (See chapter Brakes and parking brakes for instructions). © John GmbH Page 5/24...
- Page 6 Unfold the back completely and lock it by pressing lightly in the direction of the arrow. Attention! Make sure that the lock is fully engaged. 3) Lower cover folding mechanism Close the lower covers for the folding mechanism using the Velcro fastener. © John GmbH Page 6/24...
- Page 7 You can adjust the ergonomic push handle using the push buttons (A). Attention! Lift JOSI-access/JOSI-pro only by the frame. JOSI-access/JOSI-pro must not be lifted by the push handle! Pay attention to the weight balance and do not hang heavy objects on the push handle that influence the centre of gravity.
-
Page 8: Folding
The suspension must be adjusted in such a way that the spring is only slightly compressed (10 - 20%) when the user is at rest. The adjusting screw B must not be turned beyond the thread (C). © John GmbH Page 8/24... -
Page 9: Anti-Tip And Tipping Lever
The buggy can be tilted at the lower extended frame tube. 12.2 Anti-tip device with tipping lever (optional) 1) Setting JOSI-access/JOSI-pro is optionally equipped with a combined adjustable anti-tip device (A) with an integrated tipping lever (B) (Replacement for tipping lever section 13.1). -
Page 10: Front Wheel Adapter And Wheel Change (Optional)
Tighten the locking screw. Footrest 1) Setting options The footrest has the following options as standard: 1. Heel / calf plate 2. Height adjustment, adjustable to lower leg length 3. Tilt adjustment 4. Preparation for foot fixation © John GmbH Page 10/24... -
Page 11: Tilt-In-Space
2. Adjust the back to the desired position. 3. Lock the quick release. Attention! Be sure to close both quick releases. Always use two anti-tippers for the backrest adjustment and the reclining position (see chapter Anti-tipper and tipping lever). © John GmbH Page 11/24... -
Page 12: Adjusting The Seat And Backrest Cover
3) Adjusting the back belts Adjust the individual back straps to the desired position and close the zips again. Please note: The individual back straps can be adjusted to different lengths according to your wishes and body shape. © John GmbH Page 12/24... -
Page 13: Seating System
D. Place the back cushion against the back again. 19.2 Seat depth 1) Lift seat cushion Lift up the seat cushion. 2) Adjust seat depth Adjust the seat depth and press the cushion onto the Velcro fasteners. © John GmbH Page 13/24... -
Page 14: Belt Systems
(A). 3) Unhook belt connector Unhook the belts from the belt connector and pass them forward through the back. 4) Conduct belts Conduct the belts through the the desired passage slots and pull it through. © John GmbH Page 14/24... - Page 15 (front) to tighten the belt. 4) Belt adjuster closing A. Close the belt adjuster B. Fold the belts together and put the Velcro straps back on. C. Press the seat cushion onto the Velcro fasteners © John GmbH Page 15/24...
- Page 16 2) Extend belt To extend the belt, press the release and pull the front of the strap. Please note: The belt can be opened by pressing the red button. © John GmbH Page 16/24...
- Page 17 20.2 Pelvic belt / Chest shoulder belt / Seat trousers 1) Belt systems Alternatively, the following harness systems can be attached to the JOSI-access/JOSI-pro: A. Chest shoulder belt B. Pelvic belt C. Seat trousers 2) Chest shoulder belt at the bottom and pelvic...
-
Page 18: Brakes And Parking Brakes
For the transfer of the person transported, set the parking brakes and lower the anti- tipper (see chapter Anti-tipper and tipping lever). Always park JOSI-access/JOSI-pro on horizontal surfaces and firmly apply the parking brake. The drum brakes must be serviced annually by a specialist dealer (see section 27.2). -
Page 19: Sun Canopy With Extension Zips
1. Place the bar (A) in the rear part of the bag on the frame in front of the axle plates 2. Fasten the Velcro straps of the rear side of the bag (B) around the axle connection tube. © John GmbH Page 19/24... -
Page 20: Combination With Other Medical Products
Attention! In addition, note the payload capacity of the different sizes of JOSI-access/JOSI-pro (user weight and payload, see chapter Technical data). The payload of 125 kg must not be exceeded in any combination when using Decon e-Drive. -
Page 21: Useful Life And Long-Term Durability
Useful life and long-term durability The usefull life of JOSI-access/JOSI-pro is set by the manufacturer at 5 years. With regular and proper care, maintenance and repair by the manufacturer, the service life of JOSI-access/JOSI-pro can be extended depending on the intensity of use. -
Page 22: Disposal
1 year on hinges (plastic / aluminium) Reporting of serious incidents All serious incidents occurring in connection with the products must be reported to the manufacturer (John GmbH) and the competent authority. „Serious incident“ means any incident that directly or indirectly led, might have led or might lead to any of the following: ... - Page 23 Wheel camber 0° 0° 0° Seat angle approx. 10° - 30° approx. 10° - 30° approx. 10° - 30° Back angle (optional) approx. 110° - 160° approx. 110° - 160° approx. 110° - 160° © John GmbH Page 23/24...
-
Page 24: Type Label
1.8 bar Type label The weather-resistant type label of the JOSI-access/JOSI-pro is located on the rear wheel axle. If the type label is no longer legible, be sure to contact your specialist dealer so that a new type label can be requested from the manufacturer.