BROKIS OVERLAY Installation Manual

Table light

Download this manual

CM16088

Need help?

Do you have a question about the OVERLAY and is the answer not in the manual?

Page 1 CM16088...
Page 2 INSTALLATION OVERLAY MANUAL Table light Download COMPONENTS INCLUDED WARNING: WITH UNIT: 1× light The manufacturer assumes no liability for 1× light source damage resulting from incorrect assembly. 2× hand screw M4×16 1× pair cotton gloves When unpacking the light, do so with regard 1×...
Page 3: Cleaning The Glass
Cleaning information CLEANING THE GLASS BROKIS upholds only the highest possible quality standards. Prior to shipping, the light undergoes several quality controls and stages of cleaning. Because transportation, storage, and the amount of time that passes between packing at our plant and subsequent unpacking by the client can affect the light in different ways, we strongly recommend cleaning it prior to assembly.
Page 4 INSTALLING THE GLASS SHADE Position the glass shade on the concrete base with the holes facing down and use the supplied M4×16 handscrews screws to secure it in place. PAGE 4...
Page 5 INSTALLING THE LIGHT SOURCE Slide the light source into the glass shade and position it over the socket. Press gently and evenly on the light source to seat it in the socket. PAGE 5...
Page 6: Switching On The Light
SWITCHING ON THE LIGHT Plug the light into an electrical outlet and verify that it works properly. PAGE 6...
Page 7 REMOVING THE LIGHT SOURCE Gently lift one end of the light source and then the other to remove it from the socket and carefully slide it out of the glass shade. PAGE 7...

Pc1299Pc1305