BROKIS MUFFINS Manual

Package contents

MUFFINS PC849/ WOOD 01
Name:
table lamp
Components
included with unit:

Assembly

The manufacturer assumes no liability for damage resulting from failure to adhere to the
steps described in this manual. When unpacking the light, do so with regard for its ma-
terial composition – the main components are made of glass and very fragile materials.
1.
Wear the provided cotton gloves when unpacking and assembling the light.
Screw the light source into the socket. Fit the glass shade into the metal reflector. In order to prevent
damage to the glass, ensure the glass shade is seated as precisely as possible.
Plug the power cable into a power outlet and ensure that the light works properly.

Cleaning the glass

The light can be cleaned using common cleaning agents. Do not use solvents or abrasives
(e.g., scouring powder).
Prior to shipping, the functionality of each light and its components is thoroughly tested. The
manufacturer assumes no liability for the mishandling of products.
In order to eliminate potential danger in the case of damage to the outer flexible power cable of the
light, it must be replaced only by the manufacturer, one of the manufacturer's service technicians,
or a similarly qualified person.
Assembly time: 10 minutes (1 person)
TECHNICAL SUPPORT
info@brokis.cz
www.brokis.cz
1x light source, 1x glass shade, 1x wooden body, Ehmann Dimmer,
felt pad, 1 pair cotton gloves, 1x installation manual
OFFICE
Španielova 1315/25, Praha Řepy, 16300, Czech Republic
IČO 64940799, DIČ CZ64940799
SHOWROOM AND FACTORY
Sídliště Janštejn 39, Horní Dubenky, 588 52,
Czech Republic
370