BALAY 3VF300NA - annexe 1 Instructions

Brief and handy: everything
en
your dishwasher needs ...
Before using for the first
time, read the operating
instructions!
Filling the salt dispenser
Adding rinse aid
Adding detergent
Switching on the appliance
Start programme
Here we go ...
Switch off the appliance
Everything o.k. ...
Adjusting the water softening system *
Ask your water supply
company what the water
hardness is and enter ...
* only before the first wash
or if the water hardness
has been changed
Dissolves limescale (not necessary for set value 0 !) ...
Spick and span ...
A lot of dirt, a lot of detergent ...
Select programme
Quick, economical or intensive ...
Overview of programmes
The max. possible number of programmes is illustrated
in this overview. The corresponding programmes for your
appliance can be found on the fascia.
The programme data has been measured in the laboratory
according to European standard EN 50242.
Deviations are possible in practice.
*
half normal load
Additional options **
Express Wash
(VarioSpeed)
... is obtained by
increased energy
consumption at a
constant cleaning and
drying performance.
Read off the correct setting for your water hardness
< >
°dH Hardness
mmol/l Setting
range
0–6 soft 0–1,1 0
7–16 medium 1,2–2,9 1
17–21 hard 3,0–3,7 2
22–35 hard 3,8–6,2 3
Fill the salt
Unscrew
dispenser with
cover.
water before the
first wash only.
Press mark 1,
lift up cover 2.
If required, open Attention
the cover (press
Combination
button).
products are not
suitable for all
programmes, follow
manufacturer's
instructions.
Duration: hs/mins
Energy Consumption: kWh
Water consumption in litres
Flexibility ...
Half load
... for a few items, saves
water, energy and time
** depending on model
Quickly sorted ...
How to adjust the water softening system
– Switch on ON/OFF switch.
– Hold down button > and press Start button until
– Release buttons.
The display flashes and the displays
A B C
Change the setting as follows:
– Button < press until the required setting has been selected.
– Press Start button.
The and "End" displays go out. The selected setting is saved.
– Close the door.
Add salt
(never add
detergent!).
Refill if rinse-aid refill indicator is lit!
Adding
rinse aid.
Adding
detergent.
Intensive Normal Eco
70_ 65_ 50_
2:15 2:00 2:20
1,50 1,45 1,05
15 14 14
IntensiveZone Hygiene
... perfect for a mixed ... The temperature is
load. Washing pressure increased during
and washing the rinsing process. This
temperature are increases the hygiene
increased slightly. status.
and "End" flash.
A
are lit (= setting 1).
Screw on the
cover. Wash
immediately.
Screw on
the cover.
CLICK!
Slide cover
shut, press.
PLOP!
Prerinse
Gentle Quick
40_ 45_
*
1:10 0:29 0:15
0,80 0,80 0,05
13 10 4
Extra drying
... improves the drying
result by increased
temperature in the final
rinse (Please take care
with delicate dishes)