Advertisement
Quick Links
!
Please use the eufy app to complete
the setup before integrating with other
platforms. Otherwise, the lock won't
function properly.
This smart lock model is Matter compatible, allowing it to
work with Apple HomeKit''", SmartThings, Alexa. and
Google-enabled devices in your home after setup in the
corresponding opp.
-Stepl: Install smart lock and eufy security app.
St
ep2 : Use e~fy opp to scan QR code on inside lock to set up.
Step3: Set up in corresponding app.
PAP22
Raccolta Carta
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EUFY Smart Lock E31
Summary of Contents for EUFY Smart Lock E31
- Page 10 • Can be copied, can't be rekeyed. USB-C Port ⑥ • Charges the lock in emergency situations. ① Matter QR Code* • Scan to add the Smart Lock E31 in the corresponding app (See "SETTING UP THE SYSTEM"). ② ① Battery Compartment Set Button •...
- Page 11 Step 3. Exterior Assembly Step 4. Interior Assembly Installation Set Step 5. Strike Plate Installation Set Step 1 Prepare the Door 1. Remove the existing lock and check your door. 2. Check if your door has holes like the one below. Standard US doors are already compatible. Backset 2⅜...
- Page 12 Diagram B Make sure the word "TOP" on the deadbolt faces up. • If your faceplate recess is round-shaped, contact eufy Customer Service for a rounded faceplate.
- Page 13 Step 3 Install Exterior Assembly 1. If the cross bore diameter of your door is 38 mm, remove the spacer before installation. Cross Bore Diameter 1 ½ in / 38 mm 2. Make sure the cable goes underneath the deadbolt. Step 4 Install Interior Assembly 1.
- Page 14 3. Attach the side with the silicone pad to the door, and secure the mounting plate with screws. Tightly fasten the screws in place. Set the screws with your hands, then use a screwdriver to secure them. 4. Plug the power cable into the sockets on the back of the interior assembly. Route the cables around the tailpiece receiver to avoid pinching during installation.
- Page 15 Make sure the deadbolt is retracted and the thumb turn knob is on the 'unlock' position, check if the deadbolt moves properly by turning the thumbturn. 6. Install the battery pack with the correct polarity. Don't put on the cover until the system setup is done in the app. ❷...
- Page 16 3. This smart lock is Matter-compatible, enabling seamless integration with Apple Home, SmartThings, Alexa, and Google- enabled devices in your home. To set it up, use the eufy app and navigate to Device >> Settings >> Work with Matter to pair with the third-party ecosystems.
Need help?
Do you have a question about the Smart Lock E31 and is the answer not in the manual?
Questions and answers