Advertisement
Quick Links
Original Instructions
Version 3 - 10/24
230V
ROTARY
MUL TI-TOOL KIT
58307
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Draper StormForce 58307
Summary of Contents for Draper StormForce 58307
- Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
- Page 2 Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.
- Page 3 CONTENTS TITLE PAGE INTRODUCTION ......................2 REVISION HISTORY ...................... 2 UNDERSTANDING THIS MANUAL ................2 COPYRIGHT NOTICE..................... 2 CONTENTS CONTENTS........................3 WARRANTY WARRANTY........................4 INTRODUCTION SCOPE ........................... 5 SPECIFICATION ......................5 HANDLING AND STORAGE ................... 5 HEALTH AND SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE ........
- Page 4 This warranty applies in lieu of any other warranty expressed or implied and variations of its Aluminium terms are not authorised. Brass Your Draper warranty is not effective unless you can produce upon request a dated receipt or (25) invoice to verify your proof of purchase within the warranty period. Plastic Please note that this warranty is an additional benefit and does not affect your statutory rights.
- Page 5 INTRODUCTION 4.1 SCOPE For drilling, milling, grinding, engraving, cutting, polishing, sharpening, buffing and removing rust, etc. This product is intended for domestic and infrequent light trade use only. Any application other than that it was intended for, is considered misuse. 4.2 SPECIFICATION Stock No ...........................
- Page 6 BASIC MULTI-TOOL OPERATIONS HEALTH AND SAFETY INFORMATION 8.5 CHANGING BITS – FIG.5 When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
- Page 7 HEALTH AND SAFETY INFORMATION Wait for the machine to stop. Unless the machine is fitted with a safety brake, some parts may continue to move due to momentum. Wait for all parts to stop, then unplug it from the power supply before making any adjustments, carrying out maintenance operations or just finishing using the tool.
- Page 8 Wear personal protective equipment. Depending on application, use face shield, safety goggles part is damaged or missing; please contact the Draper Help Line (the telephone number appears on or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop the Title page) and do not attempt to use the product.
- Page 9 HEALTH AND SAFETY INFORMATION Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below. Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces.
- Page 10 HEALTH AND SAFETY INFORMATION HEALTH AND SAFETY INFORMATION Additional safety instructions for wire brushing operations Additional safety instructions for wire brushing operations Safety warnings specific for wire brushing operations: Safety warnings specific for wire brushing operations: Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not Be aware that wire bristles are thrown by the brush even during ordinary operation.
- Page 11 TECHNICAL DESCRIPTION 6.1 IDENTIFICATION (1) (7) (4.1) (1) Hook. (2) On/Off switch. (3) Brush cover. (4) Collar. (4.1) Spindle lock. (5) Collet nut. (6) Variable speed dial. (7) Plug and cable. - 11 -...
- Page 12 Wear personal protective equipment. Depending on application, use face shield, safety goggles part is damaged or missing; please contact the Draper Help Line (the telephone number appears on or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop the Title page) and do not attempt to use the product.
- Page 13 BASIC MULTI-TOOL OPERATIONS 8.1 SWITCHING ON AND OFF – FIG.1 Press switch (2) into the 'I' position. This will start the machine. Press switch to the 'O' position – this will stop the machine. 8.2 VARIABLE SPEED CONTROL – FIG.2 Using the variable speed dial (6) will enable you to alter the speed of the machine: Variable speed...
- Page 14 HEALTH AND SAFETY INFORMATION BASIC MULTI-TOOL OPERATIONS 8.5 CHANGING BITS – FIG.5 When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
- Page 15 BASIC MULTI-TOOL OPERATIONS 8.8 ATTACHMENTS AND MACHINE SPEEDS SANDING DRUMS Material Speed Attachments Wood Steel Aluminium Brass (16) (21) Plastic GRINDING STONES AND WHEELS Material Speed Attachments Stone Steel Aluminium Brass Plastic (23) POLISHING WHEELS Material Speed Attachments Steel (24) (17) Aluminium (12)
- Page 16 This warranty applies in lieu of any other warranty expressed or implied and variations of its Aluminium terms are not authorised. Brass Your Draper warranty is not effective unless you can produce upon request a dated receipt or (25) invoice to verify your proof of purchase within the warranty period. Plastic Please note that this warranty is an additional benefit and does not affect your statutory rights.
- Page 17 MAINTENANCE 9.1 MAINTENANCE AND PARTS REPLACEMENT Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition. The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air inlets.
- Page 18 Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.
- Page 19 11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Class II construction Read the instruction manual. (Double insulated). WEEE – Waste Electrical & Wear face mask and safety Electronic Equipment. glasses. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish.
- Page 20 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the StormForce 58307 and is the answer not in the manual?
Questions and answers