Draper STORMFORCE CMG108SF/BMC User Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Power Tool
  5. STORMFORCE CMG108SF/BMC
  6. User manual

Draper STORMFORCE CMG108SF/BMC User Manual

10.8v rotary multi-tool kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
10.8V
ROTARY
MULTI-TOOL KIT
07849
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STORMFORCE CMG108SF/BMC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper STORMFORCE CMG108SF/BMC

Summary of Contents for Draper STORMFORCE CMG108SF/BMC

  • Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Title Page

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS TABLE OF CONTENTS TITLE PAGE INTRODUCTION ......................2 REVISIONS ........................2 UNDERSTANDING THIS MANUALS SAFETY CONTENT ......... 2 COPYRIGHT © NOTICE ....................2 CONTENTS TABLE OF CONTENTS ....................3 WARRANTY WARRANTY ......................... 4 INTRODUCTION SCOPE ......................... 5 SPECIFICATION ......................5 HANDLING AND STORAGE ..................

  • Page 4: Warranty 3.1 Warranty

    This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period.

  • Page 5: Introduction

    INTRODUCTION SCOPE For drilling, milling, grinding, engraving, cutting, polishing, sharpening, buffing and removing rust, etc. This product is intended for domestic and infrequent light trade use only. Any application other than that it was intended for, is considered misuse. SPECIFICATION Stock No.

  • Page 6: Health And Safety Information

    HEALTH AND SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE Warning! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

  • Page 7: Additional Safety Instructions For Multi-Tool Use

    HEALTH AND SAFETY INFORMATION f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

  • Page 8: Residual Risk

    D.C. sources. Do not use a mains socket outlet that is not switched. – Use the correct Draper charger in conjunction with it’s corresponding battery pack (consult the Draper website for more information or to find your local Draper stockist).
  • Page 9 – Before charging, read the instructions. – For indoor use. Do not expose to rain. – Do not charge any other manufacturer’s battery packs using Draper chargers. Any other application is considered misuse. – The battery must be removed from the appliance before it is recycled.– The charger must be disconnected from the supply mains when removing the battery.

  • Page 10: Connection To The Power Supply (Charger)

    HEALTH AND SAFETY INFORMATION CONNECTION TO THE POWER SUPPLY (CHARGER) Caution: Risk of electric shock. Do not open. This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute is of the correct rating, approved to BS1362 and ASTA or BSI Kite marked.

  • Page 11: Technical Description

    TECHNICAL DESCRIPTION IDENTIFICATION (1) Spindle locking button. (5) ON/OFF Switch. (2) Variable speed control. (6) Collet nut. (3) Battery charge level indicator. (4) 10.8V Draper Power Interchange Li-ion battery. – 11 –...

  • Page 12: Unpacking And Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing, please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product.

  • Page 13: Preparing The Rotary Multi-Tool 8.1 Battery Pack Charging - Figs. 1 - 2

    PREPARING THE ROTARY MULTI-TOOL BATTERY PACK CHARGING – FIGS. 1 – 2 Important: Only Draper designated battery packs and chargers can be used in conjunction with this product. Use of any other third party battery packs/ chargers with this product is considered misuse and will invalidate the product’s warranty.

  • Page 14: Basic Multi-Tool Operations

    BASIC MULTI-TOOL OPERATIONS SWITCHING ON AND OFF – FIG.4 – Slide switch (5) into the ‘I’ position. This will start the machine. Press switch to the ‘O’ position – this will stop the machine. VARIABLE SPEED CONTROL – FIG.5 Using the variable speed dial (2) will enable you to alter the speed of the machine: –...

  • Page 15: Attachments And Machine Speeds

    Brass Aluminium Plastic Brass Diamond engraving and milling bits (10), (11) MATERIAL SPEED Stone Steel Aluminium Brass Plastic OPTIONAL ACCESSORIES A full range of accessories are available from Draper Tools. Please visit our website for details: www.drapertools.com – 15 –...

  • Page 16: Disposal

    10. DISPOSAL 10.1 DISPOSAL − At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •●...

  • Page 17: Explanation Of Symbols

    11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Do not incinerate or throw Read the instruction manual. onto fire. Wear face mask and safety For indoor use only. glasses. Do not expose to rain. Short-circuit-proof safety isolating Wear ear defenders. transformer.
  • Page 18 NOTES – 18 –...
  • Page 19 NOTES – 19 –...
  • Page 20 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

This manual is also suitable for:

07849

Table of Contents