Subscribe to Our Youtube Channel
Related Manuals for Kuppersbusch IG 646.3
Summary of Contents for Kuppersbusch IG 646.3
- Page 1 BEDIENUNGSANLEITUNG (Teil 2) Mode d’emploi (Partie 2) Gebruiksaanwijzing (Deel 2) Instruction book (Part 2) Libretto istruzioni (Parte 2) Manual de instrucciones (Parte 2) IG 646.3...
- Page 2 Description of the appliance Water hardness adjustment Levelling spacers Upper basket stop Salt container Lower spray arm Detergent dispenser Control panel Rating plate Rinse aid dispenser 10. Large filter 11. Central filter 12. Upper spray arm 13. Upper basket IN85 The control panel 2 3 4 On/Off indicator light...
- Page 3 Washing programmes Programme Degree of soil Starting Required Recommended Cycle description position of quantity of detergent push type of load button(s) wash prewash programme selector Hot prewash Intensive Main wash up to 70°C Heavy soil. 70°C 2 cold rinses Crockery, cutlery, 25 g 10 g 1 hot rinse...
- Page 4 Operating sequence 1. Check the filters 9. At the end of the washing programme Ensure that they are clean and properly positioned. (See "Maintenance and cleaning" - Instruction At the end of the programme the dishwasher will book - Part 1) automatically stop.
- Page 5 Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. UI49 The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
- Page 6 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. If dishes are loaded in the upper basket, tilt them forwards. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces.
- Page 7 Protection against flooding In order to prevent water floods, the machine has been provided with two devices, having the following characteristics: 1. In the water inlet hose: The water supply hose is fitted with a safety device, which prevents water from entering the machine should the inner hose split, due to wear.
- Page 8 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard: EN 50242 Reference programme: Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage:...
- Page 9 Küppersbusch Vertriebsgesellschaft mbH Postfach 10 01 32, D-45801 Gelsenkirche, Küppersbuschstraße 16, D-45883 Gelsenkirchen Telefon (02 09) 4 01-0, Telefax (02 09) 4 01-3 03...
Need help?
Do you have a question about the IG 646.3 and is the answer not in the manual?
Questions and answers