Getting Started; Charge Your Headset - Jabra EASYGO User Manual

GETTING STARTED

Follow these three steps before using your headset:

1. Charge your headset

2. Activate Bluetooth® on your mobile phone (refer to the manual for
your Mobile phone)
3. Pair your headset to your mobile phone
the Jabra EaSYGO is easy to operate . the answer/end button on
the headset performs different functions depending on how long
you press it .
Instruction
tap
Double tap
Press
Press and hold
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for two hours before
you start using it . Use the aC power supply to charge from a
power socket . When the battery indicator has a solid red light,
your headset is charging . When the headset is fully charged
the battery indicator turns solid green for five minutes and is
then turned off .
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset .
Please note: the lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
Duration of press
Press briefly
2 quickly repeated taps
approx: 1 second
approx: 5 seconds
Jabra EaSYGO
4