How To - Jabra EASYGO User Manual

HOW TO

Answer a call
- tap the answer/end button on your headset to answer a call .
End a call
- tap the answer/end button to end an active call .
Reject a call*
- Press the answer/end button when the phone rings to reject an
incoming call . Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
will hear a busy signal .
Make a call
- When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset . If your phone does not allow this feature, tap on the
Jabra EaSYGO's answer/end button to transfer the call to the
headset .
Activate voice dialling*
- Press the answer/end button . For best results, record the voice
dialling tag through your headset . Please consult user manual
of your phone for more information about using this feature .
Redial last number*
- Double tap the answer/end button when the headset is on and
not used .
Adjust sound and volume*
- tap the volume up or down to adjust the volume .
Mute/un-mute
- to mute, press both volume up and down at the same time .
a low beep alert plays during a muted call .
- to un-mute, tap either of the volume buttons .
* Phone dependent
Jabra EaSYGO
7