Turning Your Headset On And Off; Pairing It With Your Phone - Jabra ARROW User Manual

CHARGe YoUR HeADset
Make sure that your headset is fully charged for two hours before
you start using it . Use one of the charging solutions provided in
the box . When the light is solid, your headset is charging . When
the headset is fully charged the light is then turned off .
Use only the charger provided in the box – do not use chargers
from any other devices as this may damage your headset .
Please note: The lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period . We
therefore recommend that you recharge your device at least once
a month .

tURnInG YoUR HeADset on AnD oFF

- Slide the on/off button forward on the side of the headset to
turn on the headset . The LED will flash for a second when the
headset is on .
- Slide the on/off button backward to turn off the headset .

PAIRInG It WItH YoUR PHone

Headsets are connected to phones using a procedure called
'pairing' . by following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
1 Put the headset in pairing mode
- When you turn on your Jabra arrOW for the first time, the
headset will automatically start up on pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing
mode the light is solid .
2 Set your
- Follow your phone's instruction guide . First make sure that
is activated on your mobile phone . Then set your
phone to discover new devices . This usually involves going
to a 'setup, ' 'connect' or '
selecting the option to 'discover' or 'add' a
* Phone dependent
phone to 'discover' the Jabra ARROW
' menu on your phone and
Jabra arrOW
device .*
4