Singer TINY TAYLOR TT700 Instruction Manual page 20

STEP 2:
Use left index finger to pull bobbin case
toward the right and up, until
metal bracket touches angled edge of posi-
tion plate. Rotate handwheel until bobbin
case rests in correct position. Proceed to
step 3.
STEP 3:
Check bobbin case for' proper positioning.
Screw head should line up with seam in plas-
tic casing of machine. From side view, top of
bobbin case will be level with (or slightly
above) position plate.
Table of Contents
TT700
lower half of
20
Previous Page | Next Page