Gainsborough M298 Instructions For Use Manual

Cat Ornament with Solar Lantern
Item codes: M298 / 611820
Instructions for Use
Please read and retain these instructions for future reference
How the Solar light works:
The solar light will work automatically charge by day and illuminate at night.
Solar light should be installed in an area that receive the most direct unlight and is free from cover or
shade to allow solar lights to be charged as much as possible.
Positioning the solar light
Locate outdoors in direct sunshine, where the solar panel can receive at least 6 hours of sunshine
each day. Shady locations will influence the battery charge and may shorten the working time of the
light at nighttime. The Solar light should not be placed near external lighting such as streetlights,
which may affect the activation of the internal sensor once it becomes dark.
The solar light is ideal for night time lighting of garden decks, lawns and patios.
CAUTION: Install lights where they will not create a trip hazard or cause an obstruction.
How to use the Solar light:
1. Prior to initial use, the solar unit should be exposed to sunlight for at least 8 -12 hours to
fully charge the battery.
2. Push the switch of the OFF position when charging for the first time.
3. Once sufficiently charged, push the switch button to the ON position.
4. At night the solar light will automatically turn on.
5. Ideally align the solar panel to face the midday sun to maximise charging.
v001: 12/12/23
ENGLISH INSTRUCTIONS
Dimensions:
16 x 12.2 x 27.4 cm
Material:
Resin
Contains 1x AAA Ni-MN
200MAH Rechargeable
battery
LED lights not replaceable.
ALWAYS USE ALKALINE BATTERIES.
DO NOT USE LITHIUM BATTERIES.