MP FastPrep-96 Pro Instruction Manual page 6

3. Safety Precautions
Please read the entire instruction manual before operating the FastPrep-96™Pro.
1. Keep this manual for reference.
2. Professionals are required to operate the instrument.
3. Use the instrument only with the original power adapter.
4. When operating the instrument, the operator must wear appropriate protective gear to shield
their body, hair, and clothing from toxic liquids and solids that may be ejected.
5. If the instrument exhibits abnormal behavior or increased vibration, immediately reduce the
speed or turn off the power.
6. Ensure that the accessories and tubes are installed correctly.
7. Check that the instrument and accessories are in good condition before each operation.
8. Be careful of the risks that may arise from flammable and fragile substances.
9. Unplug the power before installing the accessories.
10. Carefully manage the instrument to avoid any collision or impact.
WARNING: DO NOT use the FastPrep-96™ Pro in hazardous environments or with
materials for which it is not intended. Using accessories not provided or recommended by
the manufacturer, or using them in ways not specified, may compromise the equipment's
safety and protection.
CAUTION: To avoid electrical shock, disconnect the power cord from the unit or unplug
it from the wall outlet to completely cut off power. Always disconnect the unit from the
power supply before performing maintenance or service. Clean up any spills immediately,
using approved liquids for biohazard spills. Solvent spills present a fire hazard—stop the
unit immediately and do not operate it until the area is cleaned and vapors have dissipated.
Do not immerse the unit for cleaning, and do not operate it if there are signs of electrical
or mechanical damage.
www.mpbio.com
6