MP FastPrep-96 Pro Instruction Manual page 17

5. Close the dome down slowly until the electromechanical lock clicks, securing the dome in
place. DO NOT SLAM the dome onto the machine!
6. Set the run parameters as described in section 5.2 Graphical User Interface.
7. Once all the parameters are selected, press "START" to begin the operation.
8. The machine will complete the operation once the preset time has elapsed.
Note: If more than one cycle is programmed, the system will enter a "rest" period between each
cycle. During this time, the motor halts, and a countdown timer appears on the display.
17
www.mpbio.com
FastPrep-96 TM Pro