Piusi K33 Use And Maintenance Manual
Mechanical meter
Hide thumbs
Also See for K33:
- Manual (32 pages) ,
- Use and maintenance manual (2 pages) ,
- Manual (17 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Piusi K33
Summary of Contents for Piusi K33
- Page 1 K33 - K44 MECHANICAL METER Use and maintenance manual Bulletin M0033E EN_...
- Page 2 Installation, use and maintenance ENGLISH INDEX GENERAL INFORMATION INSTALLATION CALIBRATION CALIBRATION PROCEDURE USE BY GRAVITY MAINTENANCE DISASSEMBLING REASSEMBLING COMPATIBILITY PROBLEMS, CAUSES AND SOLUTIONS DISPOSAL EXPLODED VIEW OVERALL DIMENSIONS Bulletin M0033E 2 /8 M0033E...
- Page 3 GENERAL INFORMATION K44 and K33 are mechanical flowmeters with nutating disk, designed toallow a precise measurement of Die- sel oil or other fluids compatible with the manufacturing material. The nutating disk of the metering chamber (seediagram 1, drawing “15”), which is setin motion by the fluid itself, drives thegear train located in the cover of themeter body (drawing “8”) which transmitsthe motion to the meter (pos.
- Page 4 USE BY GRAVITY K44 / K33 can also be used in fuel units which are not equipped with pump sand where the flow is generated by the difference in fuel level between the tank and the nozzle outlet. As a reference, a system composed ofa tank off the ground, with the meter installed right at the bottom of the tank,a 3-m long 1’’...
- Page 5 MAINTENANCE No ordinary maintenance is required provided that the meter K44 / K33 is properly installed and used. An incorrect filtering on the meter inlet may block orwear out the measuring chamber, thusaffecting the meter accuracy. Should this problem occur (see section”Problem, Causes and Solutions”) disassemble the measur- ing chamber, as shown in section“Disassembling/Reassembling”.
- Page 6 Installation, use and maintenance GEAR UNIT To reach the gear unit components: a. Remove the cover. b. Loosen the screws. c. Remove the plate. Now all gears canbe reached for inspection. Should the gasket be replaced, remove the bevel gear from the shaft by pulling axially,then remove the gear together with theshaft. The gasket replace- ment always requires the replacement of the bush provided with the spare part kit.
- Page 7 Other components, such as pipes, rubber gaskets, plastic parts and wires, must be disposed of by companies specialising in the disposal of industrial waste. posal EXPLODED VIEW OVERALL DIMENSIONS 7/124 7 /8 This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
- Page 8 ¡Descarga el manual en tu idioma! Lataa käsikirja omalla kielelläsi! Téléchargez le manuel dans votre langue! Download de handleiding in uw taal! Pobierz instrukcję w swoim języku! Baixe o manual em seu idioma! Загрузите руководство на вашем языке https://www.piusi.com/ support/search-manuals Bulletin M0033e EN_ 12.2023...
Need help?
Do you have a question about the K33 and is the answer not in the manual?
Questions and answers