Page 1
KCV-464(D1)/D464(D1)/D464V(D1) MANUAL [4.3" Digital Color LCD Videophone] COLOR HANDSET Ultra Slim Design Video Phone MONITOR TALK 4.3inch Color Digital LCD Screen Video and Audio Monitoring of the door camera/s ● ● Call & Communication with a Visitor Operating Condition Display with Icons (OSD) ●...
Page 2
Cautions for safety For safe use, please stick to the following cautions. ·Pleasedo not dispose this manual after reading the instructions carefully. ·Please read all instructions to set up rightly. ·This Cautions for Safety may include items that are not contained in specifications of the product that consumer purchases. ·If you need assistance with the set-up or operation, please contact with A/S center.
Page 3
Safety Instructions, Warnings and Cautions of Each System ·Do not disassemble this unit at will as this device is composed by precision parts. 쪾 ·Install the unit by following the set-up instructions of Kocom. ·Do not touch or insert any foreign substances, for example, sticker, magnetic, opener and the like.
Page 4
Installation location ■ Monitor installation location ■ Camera installation location ·Recommended installation ·Recommended installation height is about 1,500mm height of door camera is where screen center is at where lens is about 1,400mm eye level. In this case, wall- above the floor. In this case, hanging metal center camera stack center (Buried (center of piping) is 1,450mm...
Page 5
Door Camera Wiring : Polarzied 4 wire(VCC[12V] / GND / AUDIO / VIDEO) , Recommend adaptor : CT-140200 (13.6V) / JPW123ka1502N05(15V) ※ Kocom doesn't have responsible of non verified power supply. ※ KCV-464(D1), KCV-D464(D1), KCV-464V(D1) MONITOR IS ONLY COMPATIBLE WITH OUTDOOR CAMERA KC-XXX(D1)
Page 6
Name and Functions of each part ■ Monitor part ·Front ·Bottom ·Back ⑧ Ring/Call Volume level switch : 3 levels ① LCD Monitor ⑨ Terminal : Ports for door camera, CCTV, ② Speaker interphone, EX_monitor ③ Handset ④ Menu/Guard button : Browse menu, calls guard station. ⑤...
Page 7
Product Wiring diagram ■Camera mode diagram ※To use 'internal communication' funtion between indoor units, the first door camera must be connected to CAM1 port of the monitor. non- Polarized Polarized 2WIRE 4WIRE CAM 1 Polarized 4WIRE CAM 2 Interphone Door Opener KIP-32G Polarized External Power Input...
Page 8
Product wiring diagram ■ Terminal A. CAMERA 1 ① VCC C. INTERPHONE ② GND ① VCC ③ AUDIO ① ① ① ② GND ④ VIDEO ③ AUDIO ④ ④ ④ ④ SIGNAL B. CAMERA 2 ① ① ② ① VCC ③...
Page 9
Instructions for operation ■ Communication from door camera MENU MENU MENU GUARD GUARD GUARD MONITOR MONITOR MONITOR DOOR OPEN DOOR DOOR OPEN OPEN Press the call button to Identify the visitor from monitor. Pick up the handset to begin Hang up to end communication. make a call (Standby time: 30sec) Pressing [...
Page 10
Instructions for operation ■ Internal call MONITOR MONITOR TALK TALK Press [ ] to ring Pick up handset to make a call internal devices when stand by. (Communication time : 3 minutes) ■ Call Guard Master on SYSTEM mode MONITOR TALK Pick up a handset, Picking up from guard station...
Page 11
Menu Setup ■ Adjusting Ring/Call sound Volume adjustment : Call Vol. offers 3 level(High/Mid/Low). ■ Adjusting brightness - Confirm with [ ] button, adjust brightness pressing [ ](UP), [ ](DOWN), Press [ ] button during call to enter adjust brightness menu. (10 levels) ■...
Page 12
2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge. 3) The following cases will be subject to charge, even during warranty period: a.
Need help?
Do you have a question about the KCV-464 D1 and is the answer not in the manual?
Questions and answers