Related Manuals for Blueair Classic Pro CP7i
Summary of Contents for Blueair Classic Pro CP7i
- Page 1 User manual Additional warranty information, contact information, and FAQs are there for you. Classic Pro CP7i CP9i...
- Page 2 PM and TVOC data. To adjust the settings of your air purifier, you can either use the control panel on the device itself or utilize the Blueair App for remote control. The Blueair App grants access to additional features and functions.
- Page 3 Always disconnect the appliance from the power supply before maintenance. If your Blueair appliance is found to be defective, we will replace it with the same or a similar model at no cost, per the warranty terms. Please use caution attempting repairs yourself, as this presents the danger of electrical shock or injury.
- Page 4 Do not use the included power cord for anything else but the appliance. Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance. Do not place any objects on top of or directly against the appliance. Do not sit on, stand, climb onto or hang from the appliance.
- Page 5 Regulatory information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 6 Product map E Air outlet A Control panel B Display F Feet and wheels C Air quality sensor G Handle D Air quality indicator H Air inlet...
- Page 7 I Pre-filter J Replacement filters * K HINS Pure™ module Note! The plastic sealing is still on the filter. Please remove before first use. *CP7i has two filters/motors, one HINS Pure™ module and CP9i has three filters/motors, two HINS Pure™ module. Air quality status The Classic Pro air purifiers have a laser particle sensor to measure the fine particles (PM 1, PM 2.5 and PM 10) levels.
- Page 8 Fan Speed PM indoor level to ensure button on the interface optimal air quality. or adjust via Blueair app. Recommended setting. Note! For first time use, the built-in laser sensor will take up to 1 day...
- Page 9 Reminder! After replacing the air purifier, hold Auto button filter, it is required to manually for 5 seconds until Wi-FI LED conduct a filter reset on the air starts blinking. Then follow the purifier. instructions in the "Connect to the Blueair app" chapter.
- Page 10 Enabling/disabling HINS Pure™ Factory reset Technology in Night mode Extra long press On/Standby HINS Pure™ is OFF by default. button for about 15 seconds To enable when the device is (until all the LEDs of the in Night mode, press and hold interface light up and blink four Night mode button for 5s.
- Page 11 Connect to the Blueair app Connecting to the Blueair app allows you to control the air purifier remotely and monitor filter usage. The app o ers additional functions to the air purifier. Step 1 Step 2 Step 3 Download the Blueair app Open the app.
- Page 12 filters when the air purifier indicates filter change. To find the right main filter for your air purifier, use the Blueair app or visit www.blueair.com. The serial number and model name of your air purifier can be found on the rating label on the bottom of the air purifier.
- Page 13 Important! before maintenance Changing the main filter The air purifier calculates the remaining lifetime of the filter based on actual usage and indoor pollution levels and will indicate when it is time to change the filters. The recommended time for filter change is 9-12 months depending on the usage and indoor air conditions.
- Page 14 We recommend regular cleaning to keep your air purifier in top condition. Please follow these recommendations when cleaning your air purifier. General • Disconnect the air purifier from the power supply before maintenance. • Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric shock or damage the air purifier.
- Page 15 Moving the device The air purifier has wheels at the back to make it easier to move. • Important! Unplug the air purifier before moving it. • Make sure that the back door on the air purifier is securely closed. •...
- Page 16 "Blue - Excellent" at If the air quality does not improve with the use of the air first start up. purifier and with ventilation, please contact us. For more information and troubleshooting tips, please check the Support page on www.blueair.com...
Need help?
Do you have a question about the Classic Pro CP7i and is the answer not in the manual?
Questions and answers