Subscribe to Our Youtube Channel
Related Manuals for Slane H9 2020
Summary of Contents for Slane H9 2020
- Page 1 USER’S MANUAL For Model:H9 Date:2020.1 XL20201201 Read this manual completely before riding your electric scooter...
- Page 2 ● Special Note: In case of power supply damage or charging system malfunction, please visit the manufacturer-designated repair shop for replacement and repairs. ● Rider and Passenger: The Slane Electric Scooter is designed to carry the rider and has a maximum rated capacity of 2 passengers. Overloading is strictly prohibited.
- Page 3 Contents Chapter 1 - Safety Precautions·········································································· 1 Chapter 2 - Riding Operation Instructions···························································· 2 Chapter 3 - Battery Usage··············································································· 4 Chapter 4 - Charger Usage and Maintenance························································6 Chapter 5 - Inspection and Routine Maintenance·················································· 7 Chapter 6 - Introduction of Troubleshooting, Fault Code, and Maintenance Guideline····· 9 Chapter 7 - Main Performance Parameters Table·················································...
- Page 4 7. Please go to Slane after-sales service station for the first maintenance in the second month or 300Km after the purchase of the car, and then go t o the after-sales service station for regular vehicle maintenance every three months.
- Page 5 Chapter 2 -Riding Operation Instructions Pre-Ride Inspection Failure to conduct a pre-ride inspection may result in severe personal injury or damage to the electric motorcycle during operation. It is imperative to inspect the electric motorcycle thoroughly before riding. The following inspection items, requiring only a few minutes, can save you time from unexpected repairs during your journey and ensure safe driving. Item Inspection Contents Tires...
- Page 6 Precautions for Riding 1.If you are riding an electric motorcycle for the first time, please practice in an open area first, and only proceed to ride on the road after mastering the riding skills. 2.When using an electric motorcycle, turn on the switch by flipping it to the “ON”...
- Page 7 （3）It is recommended to check and maintain the battery at the Slane after-sales service station every three months to confirm whether the joint is loose and the battery needs to be liquid.
- Page 8 How to connect battery like photo shows Note 1: First connect the open circuit wire (positive pole of the battery) to the positive pole of a single cell, then connect batteries in series with the battery connection wire, and finally connect the negative pole of the battery to the negative pole of the battery.
- Page 9 1-2 hours to make the battery charge more full. Total charging time should not exceed for the 12 hours. If the red light still does not turn to the green light after 12 hours, the charging should be stopped, and the charger will be sent to Slane professional after-sales service station for inspection.
- Page 10 Chapter 5 -Inspection and Routine Maintenance Inspection & Contents of Inspection & Maintenance Inspection Interval Troubleshooting method Maintenance Item Tires Tire pressure, wear level Daily Inflate / replace tires/ Patch Braking System Brake distance, cables, brake pads, overload protection switch Weekly Replace brake or Top up fluid Horn...
- Page 11 Note 1. Regularly apply an appropriate amount of lubricating grease to the front axle, rear axle, and middle axle. 2. Faults caused by failure to conduct regular professional inspections are not covered under warranty. 3. Caution: Under conditions of frequent heavy loads, high-speed driving, bumpy roads, and uphill climbs, maintenance intervals should be shortened. Adjustment and Inspection of Speed Control Handle 1.
- Page 12 Chapter 6 - Introduction of Troubleshooting And Fault Code Common faults and troubleshooting methods Note: For other failures, please go to the after-sales service station for inspection. Do not modify it privately. Privately changing the circuit will to circuit crossover, wear and tear leading to short circuit and fire. Fault cause Troubleshooting method Fault phenomenon...
- Page 13 Speedometer Fault Code Fault Code Fault Description GPS fault Network failure_GPRS Discharging low temperature protection Charging low temperature protection Discharging over-current protection Discharging high temperature protection Charge saturation protection Over current protection/Over current fault Handlebar fault Motor phase loss fault/Motor Hall sensor fault MOS FET fault/drive fault Over voltage fault/Over temperature fault/ Under voltage fault/Motor stall fault...
- Page 14 Fault Code Fault Description Charging overheating protection Battery low-voltage protection Battery pack opening circuit MOS overheat protection/MOS failure Temperature sensor fault Single cell voltage abnormality D fault/ EOL alarm Hardware fault Output voltage high Output voltage low Output over current/charger low temperature Charger high temperature Hardware fault Communication fault...
- Page 15 Low power_rear wheel Fault Code Fault Description Signal status_poor_rear wheel Wheeltemperature_high_rear wheel In case of above faults, please come to SLANE repair service shop for repairing as early as possible.
- Page 16 Maintenance Guideline 1. perform the first maintenance after 1,000 km or riding for 3 months. 2. After the first maintenance , it is recommended to carry out maintenance of your vehicle every 2,000 km or riding for 6 months. performed by: Dealer stamp here Date: Mileage:...
- Page 21 Dealer inspection scheme vehicle appearance visual inspection inspection Handlebar steering inspection Mechanical Fastening of core parts structure Lubrication of inspection core components Front brake check Rear brake check Brake Tyre pressure check system inspection Disc brake check Automated lightning system and core Electrical components system...
- Page 22 Chapter 7 - Main Performance Parameters Table Item Parameters Item Parameters Vehicle trademark SLANE Motor model 10ZW6052315YA Permanent magnet, DC, brushless Vehicle model motor type motor D imensions (mm) rated voltage (V) 1785*750* 1080 wheelbase (mm) Rated rotation speed (r/ min)
- Page 23 Chapter 8 - Electrical Principle Drawing...
- Page 24 Chapter 9 - About Vehicle Vehicle Structure Diagram Front wheel Front brake Front mudguard Front shock absorber Headlamp / front lamp\ Front panel Front turn signal The mirror Rear brake handle battery Seat cushion Shelves Left and right side plate Flat fork protection plate Parking rack Single support...
- Page 25 19. After the wheel 20. Side reflector 21. Rear fender plate 22. Post license plate 23. Rear reflector 24. The rear taillight 25. Combine the switch 26. Instrument 27. Front brake handle 28. Power transfer handlebars 29. Front-loading box 30. VIN number 31.
- Page 26 Vehicle Identification Vehicle identification number: ☆□□□□□□□□□□□□□□□□□☆ Please record the vehicle identification number in the space provided. This will help you order spare parts from us. Or for tracking purposes if your vehicle is stolen. The vehicle identification number (VIN) is printed on the right side of the head tube of the frame. It is generally composed of 17 letters and numbers. The number is remembered by the user, and the position is shown in the figure: 1) The motorcycle frame number is engraved at the ①...
- Page 27 The Instrument and Indicator Light Speedometer - Indicates the motorcycle's driving speed (km/h). Odometer - Indicates the motorcycle's driving distance (km). Turn Signal Indicator. Battery Charge Indicator - Shows the level of charge in the battery. If the needle points to the H area it means the battery is fully charged;...
- Page 28 Throttle - Used to control the vehicle's speed. To accelerate, turn throttle towards you; to decelerate, turn it away from you. Front Brake Lever - When the front brake lever is squeezed, the front wheel braked, and the rear brake light comes on. The Main Power Switch The main power switch is located in the rear storage compartment under the seat.
- Page 29 Please entrust this service to the Slane after-sales service station. (5) Check the brake pads see if they are worn down to the limit mark ②.
- Page 30 2. Tire tread inspection When tire wear is too severe, the stability of the motorcycle will be severely reduced, which may cause loss of control. the center tread depth of the front tire is reduced to less than 1.6mm and the center tread depth of the rear tire is reduced to less than2mm, the tires should be replaced. Caution : Using excessively worn tires is extremely dangerous and will affect the indexing, stability, steering and handling performance.
- Page 31 Users are advised to go to the Slane professional after-sales service station for the first maintenance and care in the second month after purchasing the vehicle, and then three months thereafter. The free service content during the three-warranty period is as follows: The whole vehicle warranty period is one year from the date of purchase ( on the invoice) or 6000 kilometers of driving, and the three-warranty is invalid if either is exceeded;...
- Page 32 In addition to the normal use of the inspection, the vehicle also needs regular maintenance and maintenance. The car should be maintained for the first time in the second month. After that, it is recommended to go to the Slane professional after-sales service station for comprehensive inspection and maintenance every three months to evaluate the performance of the vehicle.
- Page 33 Check again before Tightening condition, eight-piece bowl, bearings Check of the front and rear shock absorber Check the damping stroke and seal inspection Lock check Action flexibility, assembly and adjustment Important parts Battery inspection Voltage equalization, electrolyte, solder joints, insulation End cover, bearing, hall, signal line, motor line, case Motor inspection insulation...
- Page 34 Vehicle parts warranty period and scope 1. For the frame and rear fork, the warranty period for the following conditions is 5 years (all warranty periods are calculated from the date of shipment): 1.1. 1. Natural detachment, welding failure, or fracture. 1.2.
- Page 35 Date Warranty Content Note...
- Page 36 Date Warranty Content Note...
Need help?
Do you have a question about the H9 2020 and is the answer not in the manual?
Questions and answers