Cisco Meraki MV63M-HW Installation Manual page 5

Mounting Instructions
For most mounting scenarios, the MV63 wall mount provides a quick, simple, and flexible means for mounting your
device. The installation should be done in a few simple steps:
Note: Leave the protective plastic cover on the optical dome throughout the installation process to prevent any damage
to the dome. The protective cover should be removed once the installation is completed.
1. Carefully loosen all four Torx head security screws and remove the optical dome from the base. A tether cable is
attached to the optical dome and camera base to simplify installation. Remove the desiccant pack included in the
camera during product shipment and replace it with the provided 2x spare desiccant pack. This is important to prevent
moisture from accumulating within the sealed optical dome.
5