Using Your Headset System; Powering Up Headset; Placing, Answering And Ending Calls With Pc - Plantronics SAVI W430 User Manual

3 Using Your Headset System

Powering up headset

If the headset battery is charged, the headset is automatically on.
The headset does not have an on/off button.
ImPOrTANT
It is highly recommended that you install the
Plantronics software. Though your Savi system will operate
without the software, it will limit the system's full capabilities.

Placing, answering and ending calls with PC

With Plantronics Software*
To place a call 1. Dial number from the supported
softphone application
To answer a call 1. Short press call control button on headset
To end a call 1. Short press call control button on headset
*Assumes use of supported softphone
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at
moderate levels. For more information on headsets and hearing visit: plantronics.com/healthandsafety.
Plantronics Savi User Guide
Indicator light
Without Plantronics Software
1. Short press call control button on headset
2. Dial number from softphone application
1. Short press call control button on headset
2. Answer call using softphone application
1. Short press call control button on headset
2. Hang up call using softphone application
Call control button
8