Eurotops EP746 Instruction Manual

EP746/ MH-JPD001
Please read the manual before your first use. Keep this manual safe for future reference!
WARNINGS
1. Install the lamp (lampshade installed on the bottle) on a stable surface, away from any inflammable
materials and sources of heat.
2. Keep away from direct sunlight, humidity, high temperature, water or other liquids.
3. Do not immerse in water or any other liquids.
4. Do not cover the lamp when it is on.
5. Do not touch the lampshade when it is on for it could be hot.
6. Do not stare at the luminous source.
7. Disconnect it from USB connector after completion charge.
8. Do not touch with wet hands.
9. In case of abnormalities (bulge, heat, etc.) during charging, disconnect USB connector and stop
using it. Do not attempt to repair the device. All repairs should be carried out by a qualified
electrician.
10. Do not short-circuit, modify, disassemble or puncture it.
11. Handle the lamp with care. Any impact, shock, or fall, even from a low height, may damage it.
12. The lampshade is not a toy. Keep it out of reach of children and pets.
PRODUCT DESCRIPTION
The LED lampshade is to be affixed over one wine bottle to create the perfect atmosphere for a sought-
after decorative touch to your room or when you receive your guests. PLEASE NOTE: the bottle is NOT
included.
Fig.1 – Front view
TECHNICAL SPECIFICATIONS
Table lamp:

Input (Charging) : 5 V 600MA

Battery: Lithium-ion (18650), 1200mAh, 3,7V

LED (warm light): 27pcs on bottom of the lamp and 4pcs on top, each LED: 3V, 26lum,
0.2W.
BATTERY-POWERED LED LAMPSHADE
Instructions manual
1. Button ON – OFF
2. Lampshade
3. USB charging port
4. Rod to be inserted in the neck of the
bottle.
Accessory: 1 x USB cable (included)
3W
1