Advertisement
M699/ TL-10111A
Please read the user's manual before using the product and keep it for
A. INSTALLATION/ REPLACEMENT OF BULB
Instructions before installing or replacing the bulb:
- The cable must be disconnected from the socket.
- Place the lamp on a flat, stable and non-slippery surface.
- If the lamp was lit before, allow the lamp and the bulb to cool for at least 10 minutes
before any operation.
COMPATIBLE BULB
Halogen bulb
Characteristics:
1 bulb of 25W maximum not
included, base E27
B. USE OF THE LAMP
First, plug the lamp into the mains and perform the following:
Touch the base of the lamp lightly to light
it (low brightness).
Touch the base lightly a third time for
strong brightness.
TABLE LAMP "BANKER" TOUCH SWITCH
future reference.
Power :
220-240V
50Hz
Touch the base lightly again to obtain an
average brightness.
To turn the lamp off, touch the base
lightly again.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eurotops BANKER
Summary of Contents for Eurotops BANKER
- Page 1 M699/ TL-10111A TABLE LAMP "BANKER" TOUCH SWITCH Please read the user’s manual before using the product and keep it for future reference. A. INSTALLATION/ REPLACEMENT OF BULB Instructions before installing or replacing the bulb: - The cable must be disconnected from the socket.
- Page 2 The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. Imported by PRODIS , 1 rue de Rome 93110 ROSNY SOUS BOIS-France Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD...
Need help?
Do you have a question about the BANKER and is the answer not in the manual?
Questions and answers