HOMCOM 820-415V70 Quick Start Manual page 4

Usage:
● Connect the appliance to a safety socket.
● Turn on the switch to the heating position (I or II).
Heat setting I
Heat setting II
● For heating function II, turn the thermostat knob clockwise until it reaches the
maximum temperature.
● Once the room temperature reaches the desired level, gradually turn the
thermostat knob counterclockwise to adjust to your preferred temperature.
● To turn off the heater, switch the dial to the '0' position. Then unplug the
appliance.
Overheat safety device
● Your heater is equipped with a safety device that will automatically shut off the
heater if it detects overheating. If the safety device activates, please turn off the
heater, unplug it and allow it to cool completely. Check for any blockage in the
air inlet or outlet before attempting to restart the heater.
● If the heater still fails to operate or if the safety device continues to shut off the
heater, please return the heater to your nearest service centre for examination
or repair.
Maintenance:
1. Always disconnect the appliance and allow it to cool completely before
performing any maintenance.
2. Use a vacuum cleaner to remove dust from the grilles of the heater.
3. Clean the outside of the unit with a damp cloth, and then dry it with a dry cloth.
Never submerge the unit in water or allow water to drip into it.
Storing:
1. Always disconnect the appliance, allow it to cool completely and clean it before
storing.
2. If you will not be using the device for an extended period, place the unit and the
instruction manual back in the original box and store it in a dry and well-
ventilated place.
3. Avoid placing heavy items on top of the box during storage, as this may damage
the appliance.
Recycling (Disposal of the product at the end of its life)
Waste electrical products should be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority for
recycling advice.
1000W
2000W
3