Oliveri Holdfast HF871-LH Installation Instructions

Installation Instructions
Aug 2023 / Version1
Holdfast Inverted T Shower Rails
HF871-LH / HF871-RH
Please install the Grab Rail according to this guide.
IMPORTANT
Prior to installation, test fit the Grab Rail to ensure it does not obstruct doors, surfaces, fixtures or switches. Ensure the wall
fixing screws are anchored into masonry or timber. Do not install them directly into plasterboard. After installation, test the
Grab Rail to confirm stability and correct operation.
Do not install outdoors, near chlorinated pools or in salt water environments.
WARRANTY This Grab Rail is warranted to be free from manufacturing defects for a period of 15 years replacement parts and 1 year labour.
Subject to the terms contained in the full warranty information available at https://oliveri.com.au/service-and-warranty, where a genuine
manufacturing defect arises within the warranty period Oliveri will, at its election, repair the defect or replace the product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
SERVICE
If the product requires servicing, please contact your installer. If the installer is satisfied that the problem is not due to poor installation, contact
Oliveri's nominated Warranty Service Agent for assistance on:
Ph: 08 8348 6444 (choose the after sales service and warranty option)
Email: warranty@oliveri.com.au
For full warranty information visit: https://oliveri.com.au/service-and-warranty
If a warranty service call finds that the product does not have a genuine manufacturing fault, our Warranty Service Agent reserves the right to
pass on any call-out fee to the householder.
PARTS LIST
32
32
205 205
700 700
Right hand (or left hand) grab rail assembly
HF871-LH HF871-RH
Wall plugs and screws (includes 3 sets)
IMPORTANT: Never use abrasive or harsh chemical cleaners. Wipe with warm soapy water to maintain surface finish.
Oliveri Solutions Pty Ltd ABN 12 007 551 886 51 Naweena Rd, Regency Park SA 5010 P 08 8348 6444 E sales@oliveri.com.au