Download Print this page

Oliveri Dublin DU7130F-N Installation Instructions

Semi inset basin with no tap hole

Advertisement

Quick Links

This Oliveri basin is manufactured to standard AS/NZS 1172.4
DU7130F-N
Oliveri Solutions Pty Ltd
ABN 12 007 551 886
51 Naweena Rd, Regency Park SA 5010 P 08 8348 6444 E sales@oliveri.com.au
2022-11/Version 1.0
Dublin
Semi Inset Basin with No Tap Hole
DU 7 1 3 0F
-N
CARE & MAINTENANCE
Avoid using abrasive or acid-based cleaning products.
WARRANTY
DOMESTIC USE
This basin is warranted to be free from manufacturing defects for a period of:
20 years replacement parts and 1 year labour.
COMMERCIAL USE
This basin is warranted to be free from manufacturing defects for a period of:
7 years replacement parts and 1 year labour.
Subject to the terms contained in the full warranty information available at
https://oliveri.com.au/service-and-warranty, where a genuine manufacturing defect arises
within the warranty period Oliveri will, at its election, repair the defect or replace the
product.
This warranty does not cover against normal wear and will be voided if the
product is misused or not installed in accordance with these instructions.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
SERVICE
If the product requires servicing, please contact your installer (preferably the one who
installed it). If the plumber / installer is satisfied that the problem is not due to poor
installation, contact Oliveri's nominated Warranty Service Agent for assistance on:
Ph: 08 8348 6444 (choose the after sales service and warranty option)
Email: warranty@oliveri.com.au
For full warranty information visit: https://oliveri.com.au/service-and-warranty
If a warranty service call finds that the product does not have a genuine
manufacturing fault, our Warranty Service Agent reserves the right to pass on any
call-out fee to the householder.
DU7130F-N Installation Instructions

Advertisement

loading

Summary of Contents for Oliveri Dublin DU7130F-N

  • Page 1 Subject to the terms contained in the full warranty information available at https://oliveri.com.au/service-and-warranty, where a genuine manufacturing defect arises within the warranty period Oliveri will, at its election, repair the defect or replace the product. This warranty does not cover against normal wear and will be voided if the product is misused or not installed in accordance with these instructions.
  • Page 2 THIS BASIN MUST BE INSTALLED IN ACCORDANCE WITH AS/NZ 3500.2 AND LOCAL REGULATIONS. THIS BASIN MUST BE INSTALLED BY A LICENSED PLUMBER. Before you begin Check the product for damage, if the product is damaged return to the store of purchase. Check the product is complete with all components required to install.