Advertisement
Quick Links
I MPO R TANT ! RE TA IN T HIS INS TRUCTION
M A NUAL F OR F UT URE REFE RE NCE !
INSTRUCTION MANUAL FOR
RIDE ON CAR MODEL
SPRINTER
This toy is produced in conformity with the requirements of Toy
Safety Directive 2009/48/EC of the European Parliament and
the
Council
and
the
applicable
European
standards,
the
regulation on essential requirements and conformity
assessment of toys, the regulation on conformity marking and
the applicable European standards
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Chipolino SPRINTER
Summary of Contents for Chipolino SPRINTER
- Page 1 M A NUAL F OR F UT URE REFE RE NCE ! INSTRUCTION MANUAL FOR RIDE ON CAR MODEL SPRINTER This toy is produced in conformity with the requirements of Toy Safety Directive 2009/48/EC of the European Parliament and Council...
- Page 2 TO GUARANTEE THE SAFE USE OF THIS PRODUCT FOLLOW THE WARNINGS, GUIDELINES AND RECOMMENDATIONS IN THIS MANUAL: IMPORTANT! WARNINGS! • CAUTION! NEVER LEAVE THE CHILD UNATTENDED! • CAUTION! THIS TOY HAS NO BRAKE! • CAUTION! THIS TOY IS NOT SUITABLE FOR CHILDREN UNDER 3 YEARS AND WEIGHT MORE THAN 25 kg.
- Page 3 IMPORTANT! WARNINGS AND GUIDELINES FOR BATTERY USE • Batteries to be installed or replaced only by adult! • After inserting batteries, always secure the battery compartment with the cover. • Do not allow children to access or play with the batteries! • Use only batteries of the designated type and power. • Do not use batteries of different types. • Do not mix new with used batteries. • Follow the designated polarity in the battery compartment. • Remove damaged or worn out batteries. • Do not attempt to charge non-rechargeable batteries. • Remove the batteries when the product will not be used for long time. • Do not throw the batteries in open fire. Do not take the batteries to pieces.
- Page 4 MAIN PARTS 1 – Wheel 2 – Backrest 3 – Steering wheel 4 – Body of toy ASSEMBLY GUIDELINES ASSEMBLY OF FRONT WHEEL washer washer front axis wheel wheel decorative decorative front axis cover cover bushing bushing steering axis bracket 1. Place washer and wheel on front axis.
- Page 5 ASSEMBLY OF REAR WHEEL wheel washer wheel decorative wheel decorative rear axis cover cover body bracket 1. Place washer and wheel on rear axis. 2. Thread the rear axis through the slot at body of the toy. 3. Install at the other side the following elements in this order – wheel, washer and fix with the bracket. 4. Install at the end with light pressure the decorative covers at both sides. ASSEMBLY STEERING WHEEL AND BACKREST steering wheel backrest body of toy front wheel 1. Insert the steering axis from down part of toy’s body in direction up, as shown in figure. 2. Place the steering bar over the steering axis and press until you hear a click sound. 3. Place the backrest to toy’s body and press until it fixes.
- Page 6 ASSEMBLED RIDE ON CAR BATTERIES AND FUNCTIONS 2 x AA/1.5V (LR6) To use the toys’ functions, you have to install batteries: 1 – Unscrew with a screwdriver the screw (a) at batteries compartment cover and remove the cover; 2 – Install 2 pcs batteries (c) size АA/1,5V (LR6) in batteries compartment (b) by obeying the given polarity. 3 – Place the cover of batteries compartment and tighten the screw (a) by using the screwdriver. Press any of the buttons (D) at steering bar to start the melodies.
- Page 7 CARE AND MAINTENANCE INSTRUCTIONS • Regularly check the plastic parts of the ride on car for any cracks or damage. • Regularly oil the moving parts. • Clean the toy by using a damp soft towel or sponge and a mild soap. Do not pour the toy with water. • Do not clean with aggressive detergents containing abrasive particles, ammonia, bleach or spirit. • Store the product in a clean and dry place, without moisture and at a safe distance from heat sources! Do not subject to direct environmental effect – sun, rain, moisture or harsh temperature changes! • Do not use the product on muddy, sandy or gravel covered terrains, which can damage the moving parts. • In case of problems related to normal operation, contact authorized service centers for consultation or repair. Materials used: plastic, metal ROCSR0240xxx/901...
- Page 8 Producer: Produced for Chipolino in PRC Importer: CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str, Plovdiv, BULGARIA; tel.: +359 32 600 889; www.chipolino.com...
Need help?
Do you have a question about the SPRINTER and is the answer not in the manual?
Questions and answers