Advertisement
Quick Links
Advertisement
Related Manuals for Jamex 7110
Summary of Contents for Jamex 7110
- Page 1 Jamex 7110/7112/7114 Stand Alone Card Reader Manual...
- Page 2 We look forward to assisting people like you with ongoing innovations in revenue generation through vending. Jamex is a manufacturer who believes in service. Should you have any questions concerning your Jamex 9550 Series Vend Station or other Jamex Vending Systems, please call your authorized Jamex dealer, or Jamex customer service at 800-289-6550, or visit our web site at www.jamexvending.com.
- Page 3 TABLE OF CONTENTS Introduction General Features Model 7110 Features Model 7112 Features Model 7114 Features Installation and Setup Unpacking The Card Reader Physical Mounting Installation Programming Power Up Setting The Max Card Value Setting Prices (7110/7112) Optional Card Reader Settings...
- Page 4 INTRODUCTION Thank you for choosing the Jamex proprietary Stored Value Card system. A Stored Value Card has the amount of funds encoded directly onto the card. Cards are not tied to a specific account so the system does not need to be online.
- Page 5 • Connects to a PC via a USB port to communicate with several types of vending software using Jamex's proprietary "JPC" protocol. • Used with Jamex's proprietary Copy Card Admin Software (CCAS) for use in a "point of sale" installation. CCAS also features a batch revalue mode.
- Page 6 If the driver is not installed automatically, It can be found in the support/downloads section at jamexvending.com. If the 7114 card reader is intended to be used with a Jamex Embedded Application, the USB cable should connect directly to the copier's rear USB port after the Embedded Application is installed.
- Page 7 Card and the MAX Card value will need to be changed on every stand alone reader so that they all match. If your site has the Jamex 6557-70 coin and bill vend station and/or the Jamex 7200 series Revalue Station, There are two Max Card settings.
- Page 8 Setting Prices (7110/7112) The 7110 and 7112 card readers have pricing for up to four site codes to allow for different pricing for up to four groups of user's. A vast majority of sites only use one site code. Note: A 7114 does not have prices to set.
- Page 9 Factory Settings Other settings like Timing or Value should not be changed without speaking with Jamex support first. If you are unsure of a setting, contact Jamex support support@jamexvending.com or call (800) 289-6550 Operating Guide Making Copies (7110/7112) Insert a cash card or Bypass Management Card into the reader.
- Page 10 Setting A Card Value (7112 Batch mode) A 7110 can not add value to cards and a 7114 requires software to add value. A 7112 comes with a Set Card Value Management Card. This card puts the 7112 card reader in batch mode to set the value on cards. This card is usually set to 5.00 but can be purchased with other starting...
- Page 11 The Remaining Value On Cards Prior To Being Overwritten. The Jamex 7112 card reader has a batch mode used to set a cards value. Most sites recycle cards and revalue them to be sold again. The value prior to being overwritten is not saved.
- Page 12 Reading The Meters Jamex card readers store the meters or sales amounts for each site code. • Insert the Read Meters management card. • The display will show “Meters..” for an instant and will return the card to the exit position.
- Page 13 Note: Cleaning cards can only be used once on each side. Reusing a card that has already collected dust and dirt will do more harm than good. Contact the Jamex sales staff to order cleaning cards. The current part number for a box of 50 cleaning cards is 301391.
- Page 14 The card may still work but this is a sign of a dirty or worn read/write head. Run a cleaning card through the reader. If problems persist, Contact Jamex Customer Support to have the reader repaired or replaced.
- Page 15 Invalid Card Type If this is a "Set Card Value" card, it was only designed for the Jamex 7112 card reader. If this is not a "Set Card Value" card, the card is damaged or miss-programmed.
Need help?
Do you have a question about the 7110 and is the answer not in the manual?
Questions and answers