Page 1
8220 Self-Service Card Station User Manual...
Page 2
Should you have any questions concerning your model 8220 or other Jamex Vending Systems, please call your authorized Jamex dealer, or Jamex customer service at 800-289-6550, or visit our web site at www.jamexvending.com. WE MAKE IT RIGHT. WE DO IT NOW.
TABLE OF CONTENTS USER'S MANUAL Overview Idle Screen Choose a Transaction Purchasing a New Card Inserting Funds Dispensing a Card Adding Value To a Card Inserting a Card Adding funds Remove Card From The Card Reader...
Overview The 8220 allows patrons to purchase and revalue stored value cards. The touch screend display provides a user interface to make this as intuitive as possible, adding helpful prompts as needed. This guide will illustrate the steps needed to purchase a card and to...
Idle Screen Choosing a Transaction The first screen a patron will see is the idle screen. This screen displays • The Jamex logo • The “Purchase a new card” button • The “Add value to a card” button...
The patron is prompted to insert the cost of the new card into the bill acceptor • Once the cost of a new card has been met the 8220 will dispense a card. NOTE: If the cost of a card is greater than $1.00; Canceling a...
The patron will remove their card and touch OK to return to the Idle screen. NOTE:Once the card is removed the 8220 will return to the idle screen after a few seconds even if the patron neglects to touch the...
Adding Value to a Card A patron can add value to a card value in one of two ways: • Simply insert their a card into the 8220's card reader to go to the “Adding Funds” screen • Touch the “Add value to a card” button, which provides step by step instructions.
Adding Funds When the card is inserted, current balance is displayed. • The arrow will change direction pointing toward the bill acceptor. • The message on the screen will reflect the current card value and inform the patron the maximum amount that can be inserted.
• Touch the OK button to return to the idle screen. NOTE: Once the card is removed the 8220 will return to the idle screen after a few seconds even if the patron neglects to touch the OK button.