Page 1
(a) both the original and the copies are used only in support of equipment sold by Jamex, Inc., and (b) if this notice is attached to each copy. No part of this document may be reproduced by any means, other than as stated above, without the written permission of Jamex, Inc., 2415 N.
Reading the Meters INSTALLATION and SERVICE GUIDE Installation & Set up Page 6 Unpacking the Vending System Physical Mounting Electrical Installation Programming Your Jamex Model 7112 Page 6-8 Adjusting the Price Per Copy Programming Value to Cards Maintenance Page 9 Trouble-Shooting Guide...
Page 3
Model 7112 Stand Alone Card Reader is one part of a complete system that facilitates vending through the use of Stored- Value Cards rather than, or in addition to, the use of cash. The use of Stored-Value Cards can increase security of your vended services by reducing the handling of cash.
Page 4
Jamex, “The Payment Method People” Since 1981, Jamex has developed vending technology for a variety of applications. We look forward to assisting people like you with ongoing innovations in revenue generation through vending. Should you have any questions concerning your model 7112 or other Jamex Vending Systems, please call Jamex at 1-800-289-6550 or visit our web site at www.jamexvending.com.
These cards may also be coded to differentiate between four distinct groups of users. These user groups are sometimes referred to as Site Code. The activity for each Site Code is tracked separately in the meters of your 7112. When a copy card is inserted into the 7112 Card Reader it will determine that the card is acceptable to that reader, record the activity, and determine what price to charge and to deduct from the value stored on the card for the service purchased.
The Model 7112 has the capability of programming value to Stored Value Cards. This can be done with a Set Card Value card, which is supplied with the 7112 Card Reader. For instructions on how to use a Set Card Value card, see page 8, Program Value to Cards, section of this manual.
This completes the meter readings. Remove the Read Meters card and the display will return to “Insert Your Card”. NOTE: The 7112 card reader can be configured with up to four separate site codes, allowing different copy prices for each site code.
- Management Card Set - Read Meters Card, Set Prices Card, Bypass Card, Set Card Value Card PHYSICAL MOUNTING Your Jamex Vending System may be simply placed near the copier it will control or it may be bolted to a cabinet or a table via the pre drilled mounting holes in the base of the unit.
Page 9
C Timing Escrow T Dual$Dly Color Hours Minutes Month Date Year These are programming modes that relate to the copier function and adjustment of these should not be attempted without the assistance of Jamex Technical Support Personnel.
Page 10
The display will scroll Set Card Value $20.00 All Stored Value Cards inserted in the Model 7112, while in the Set Card Value Mode, will be encoded with this value. When finished programming Stored Value Cards, insert the “Set Card Value Card”.
MAINTENANCE The Jamex Vending System requires the use of a double sided cleaning card designed especially for credit card magnetic stripe readers. A sample card is included with your reader. Insert the cleaning card into the card reader, it will be returned to the exit position.