Controls And Connectors - Dell D1901N User Manual

CONTROLS AND CONNECTORS

SIGNAL CABLE
Connecting the Signal Cable: Plug the Signal Cable one end to LCD
monitor's "DSUB-Input" socket , the other end to the computer's VGA port and
tighten the two screws on the cable connector.
Connecting the Power Cord: Plug one end of the AC power cord to the
LCD monitor's AC input socket, and the other end to Wall outlet.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
1. Power Cable
Signal Cable
2.
1
Figure 2 Connecting Cables
2