APRILIA SHIVER 750 GT ABS Manual page 81

Hide thumbs Also See for SHIVER 750 GT ABS:
Table of Contents

Advertisement

Get onto the bike in riding posi-
tion.
Make sure that the stand has
been fully retracted.
Make sure the light switch (1) is
set to the low-beam light posi-
tion.
Set the engine stop switch (2) to
RUN.
Turn the key (3) and set the ig-
nition switch to ON.
03_12
At this stage:
The multifunction display shows
the ignition screen for 2 sec-
onds.
On the instrument panel, all
warning lights (4) and the back-
lighting are on for 2 seconds.
The rpm indicator (5) goes to the
bottom of the scale and after 3
seconds, it goes back to the
minimum value.
The current value is instantly in-
dicated on the instrument panel
during regular vehicle riding.
IF THE LOW FUEL WARNING LIGHT
(6) ON THE INSTRUMENT PANEL
TURNS ON, REFUEL THE VEHICLE AT
ONCE.
Ga op het voertuig zitten in de
rijpositie.
Controleer of de standaard vol-
ledig ingeklapt is.
Controleer of de schakelaar van
de lichten (1) zich in de positie
van de dimlichten bevindt.
Plaats de schakelaar voor het
stilleggen van de motor (2) op
RUN.
Draai de sleutel (3) en plaats de
ontstekingsschakelaar op 'ON'.
Op dit moment gebeurt het volgende:
Op het multifunctioneel display
verschijnt het beeldscherm van
de start voor 2 seconden.
Op het dashboard lichten alle
controlelampen (4) en de retro-
verlichting op voor 2 seconden.
De wijzer van de toerenteller (5)
gaat naar het schaalminimum,
en na 3 seconden keert hij terug
naar de minimum waarde.
Tijdens het normale gebruik van
het voertuig wordt op de instru-
menten de huidige waarde on-
middellijk getoond.
WANNEER OP HET DASHBOARD DE
CONTROLELAMP VAN DE BRAND-
STOFRESERVE (6) OPLICHT, MOET
MEN ONMIDDELLIJK BRANDSTOF
TANKEN.
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl 750 shiver gt abs

Table of Contents