ViewSonic M1XB User Manual page 15

Making Connections
Connecting to Power
DC Power (Power Outlet)
3
1. Connect the power cord to the power adapter.
2. Connect the power adapter to the DC IN jack at the side of the projector.
3. Plug the power cord plug into a power outlet. When connected, the charging
status LED will turn white.
NOTE: Charge the projector for 4.5 hours via the power adapter before using it
in battery mode for the first time.
IMPORTANT
ͫ Use only the bundled power adapter to change the battery pack and supply
power to your LED projector.
ͫ Make sure your LED projector is connected to the power adapter before
turning it on for the first time. We strongly recommend that you use a
grounded wall socket while using your LED projector in power adapter
mode.
ͫ The socket outlet must be easily accessible and near your LED projector.
ͫ To disconnect your LED projector from its main power supply, unplug your
LED projector from the power socket.
2
1
15