APRILIA SCARABEO 50 - 1997 Manual page 55

Carefully read p. 54 (BULBS).
The headlight contains a low/high beam
bulb (1).
To change the bulb, proceed as follows:
LOW/HIGH BEAM BULB
Remove the front handlebar cover, see
p. 45 (REMOVING THE FRONT HAN-
DLEBAR COVER).
Rotate the bulb socket (2) anticlockwise
and extract it out of seat.
Slightly press the low/high beam bulb (1)
and rotate it anticlockwise, extract it and
replace it with a new one of the same
kind.
Carefully read p. 54 (BULBS).
To change the bulb, proceed as follows:
Unscrew and remove the screw (3).

While removing the indicator
lens, proceed carefully in order
not to break it.
Remove the indicator lens (4).
Press the bulb (5) slightly and turn it anti-
clockwise.
Remove the bulb from its seat.
Correctly install a new bulb of the same
type.

If the bulb socket (6) has gone
out of its seat, insert it again cor-
rectly, making the opening of the bulb
socket itself coincide with the seat of
the screw.

Upon reassembly, correctly po-
sition the indicator lens in its
seat.
Tighten the screw (3) carefully, without
exerting too much pressure, in order to
avoid damaging the indicator lens.
use and maintenance Scarabeo 50 55