APRILIA RSV 1000 R - 2003 Manual page 139

CAUTION
Never pull on the wiring to disconnect a
bulb connector.
PARKING LIGHT BULB
Remove the front fairing, see page 118
(REMOVING THE FRONT FAIRING).
CAUTION
Never pull on the wiring to extract a
bulb holder.
Grasp the parking light bulb holder (6)
and pull to extract.
Remove the bulb and fit a new bulb of
equal rating.
NOTE
Ensure that the bulb fits correctly
into the bulb holder.
1
6
REPLACING THE FRONT AND
REAR DIRECTION INDICATOR
BULBS
Read page 104 (BULBS) carefully.
Place the vehicle on the stand, see page
82 (PLACING THE VEHICLE ON THE
STAND).
Unscrew and remove the screw (1).
CAUTION
The protective shield is retained by a
locating peg. Remove carefully or the
locating peg might break off.
Remove the lens (2).
use and maintenance RSV 1000 R
2
139
- RSV 1000 RFACT
USA USA