Download
Share
Print this page
Jolly Mec UNIVERSALJOLLY EVO 62 QUICK 5S Instructions For Installation, Use And Maintenance Manual
  1. Manuals
  2. Brands
  3. Jolly Mec Manuals
  4. Wood stove
  5. UNIVERSALJOLLY EVO 62 QUICK 5S
  6. Instructions for installation, use and maintenance manual
Jolly Mec UNIVERSALJOLLY EVO 62 QUICK 5S Instructions For Installation, Use And Maintenance Manual

Jolly Mec UNIVERSALJOLLY EVO 62 QUICK 5S Instructions For Installation, Use And Maintenance Manual

Wood burning air inset fireplace
Hide thumbs

Advertisement

Quick Links

Download this manual
UNIVERSALJOLLY EVO QUICK
UNIVERSALJOLLY EVO QUICK CT
UNIVERSALJOLLY EVO 62 QUICK
UNIVERSALJOLLY EVO 68 QUICK
UNIVERSALJOLLY EVO 80 QUICK
UNIVERSALJOLLY EVO 90 QUICK
UNIVERSALJOLLY EVO 62 QUICK 5S
UNIVERSALJOLLY EVO 68 QUICK 5S
UNIVERSALJOLLY EVO 80 QUICK 5S
QUICK CORNER 62 DX 5S
QUICK CORNER 62 SX 5S
QUICK CORNER 80 DX 5S
QUICK CORNER 80 SX 5S
UNIVERSALJOLLY EVO 90 QUICK CT
I N S T A L L A T I O N ,
MAINTENANCE MANUAL
To be kept by the purchaser
UNIVERSALJOLLY EVO QUICK 5S
Wood burning air inset fireplace
U S E
A N D
QUICK CORNER 5S

Advertisement

loading
Need help?

Need help?

Do you have a question about the UNIVERSALJOLLY EVO 62 QUICK 5S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Jolly Mec UNIVERSALJOLLY EVO 62 QUICK 5S

Summary of Contents for Jolly Mec UNIVERSALJOLLY EVO 62 QUICK 5S

  • Page 1 UNIVERSALJOLLY EVO 62 QUICK UNIVERSALJOLLY EVO 68 QUICK UNIVERSALJOLLY EVO 80 QUICK UNIVERSALJOLLY EVO 90 QUICK UNIVERSALJOLLY EVO 62 QUICK 5S UNIVERSALJOLLY EVO 68 QUICK 5S UNIVERSALJOLLY EVO 80 QUICK 5S QUICK CORNER 62 DX 5S QUICK CORNER 62 SX 5S...
  • Page 2 Dear Customer, thank you for having chosen to heat and save with a Jolly Mec product. Please carefully read and keep this sheet before using the equipment. This sheet provides necessary information and suggestions on how to correctly install, use, clean and maintain the product.
  • Page 3 TABLE OF CONTENTS CHAP.01 PREMISES........................... 4 01.1 WARNINGS ..............................4 01.2 SYMBOLOGY ............................... 5 01.3 APPLIED STANDARDS ..........................5 01.4 USE AND STORING OF THE INSTALLATION AND MAINTENANCE MANUAL ........6 01.5 MANUFACTURER’S LIABILITY AND WARRANTY CONDITIONS ............. 6 CHAP.02 ACCIDENT PREVENTION / SAFETY REGULATIONS .............. 7 02.1 GENERAL CONSIDERATIONS ........................
  • Page 4 CHAP.01 PREMISES 01.1 WARNINGS • Familiarity and compliance with the instructions given in this manual will ensure quick installation and correct use of the appliance. • Read the manual attentively before commencing installation, and be certain to follow the directions it contains, otherwise the war- ranty could be invalidated and the performance and safety of the appliance jeopardized.
  • Page 5 This point is particularly important. An important point regarding behaviour for preventing injury and damage to DANGER: materials is expressed. 01.3 APPLIED STANDARDS All JOLLY MEC products are constructed according to the following directives: European construction products regulation. • EU 305/2011 Machines. •...
  • Page 6 01.5 MANUFACTURER’S LIABILITY AND WARRANTY CONDITIONS Upon the delivery of this manual, Jolly Mec S.p.A. cannot be held liable, whether civil or criminal, for accidents due to partial or total non-compliance with the specifications herein contained. The manufacturer is especially held harmless from any liability in the following cases: •...
  • Page 7 CHAP.02 ACCIDENT PREVENTION / SAFETY REGULATIONS 02.1 GENERAL CONSIDERATIONS • The manual refers to essential aspects of the directives, regulations and dispositions on using the machine, summarising its most significant points. • General legal regulations and mandatory rules regarding injury prevention and environmental protection must be observed.
  • Page 8 • In alarm status for failed start up, do not try to restart the appliance until the firebox has been thoroughly cleaned. • Keep the ventilation grids in the area the appliance is installed in clean conditions. • Do not use fuels that are not recommended. •...
  • Page 9 RESIDUAL RISKS Though JOLLY MEC CAMINETTI S.p.A. does everything within its power to produce its systems with the greatest competence regarding safety and consulting all the directives, laws, and regulations available, there are still, if minor, some residual risks during the phases of: •...
  • Page 10 CHAP.03 HANDLING AND TRANSPORT 03.1 RECEIVING GOODS The device is delivered on a pallet in a cardboard box and protected with shrink wrap cover sheet when receiving merchandise, check that: • all packaging is intact • all of the merchandise indicated on the delivery bill has actually been delivered •...
  • Page 11 CHAP.04 ECOLOGICAL REGULATIONS 04.1 WASTE MATERIALS AND THEIR DISPOSAL Spare parts replaced during the machine’s product life are to be considered waste and must be taken to special collection centres or entrusted to authorised disposal centres. Ashes must be placed in a metal container with a sealed lid. The closed container must be placed on a non-combustible base and kept away from combustible materials until all the embers have been extinguished.
  • Page 12 END-OF-LIFE DISPOSAL OF THE EQUIPMENT COMPONENTS ( REGULATION (EU) 2015/1185 - Annex II - par. 3 - a) - 3) ) INSTRUCTIONS FOR CORRECT PRODUCT DISPOSAL The owner is fully and exclusively liable for stove demolition and disposal according to laws in force in his/her country regarding safety, respect and protection of the environment.
  • Page 13 CHAP.05 DESCRIPTION 05.1 PRODUCT PRESENTATION Jolly-Mec products are the result of over forty years experience in the wooden biomass combustion sector; they are designed and engineered to meet the increasing demands of today’s markets with high performance levels and savings enveloped in a modern design UNIVERSALJOLLY EVO 62 QUICK, UNIVERSALJOLLY EVO 68 QUICK UNIVERSALJOLLY EVO 80 QUICK, UNIVERSALJOLLY EVO 90 QUICK, UNIVERSALJOLLY EVO 62 QUICK 5S, UNIVERSALJOLLY EVO 68 QUICK 5S, UNIVERSALJOLLY EVO 80 QUICK 5S,...
  • Page 14 05.2 PRODUCT IDENTIFICATION It is COMPULSORY to indicate the product MODEL, the LOT number and SERIAL NUMBER in all communications with the Manufacturer. Identification numbers are printed on the adhesive plate located on the back of the appliance as illustrated. Appliance performance values measured during inspection tests according to the indicated reference and EC markings are also included on the plate.
  • Page 15 CHAP.06 TECHNICAL DATA 06.1 HOMOLOGATION Technical specifications resulting from laboratory tests conducted according to EN 13229:2006 test methods at the CERTIFICATION institute. Universaljolly Universaljolly Universaljolly Universaljolly Descrizione EVO 62 QUICK EVO 68 QUICK EVO 80 QUICK EVO 90 QUICK Burnt heat output 10,8 12,2 14,0...
  • Page 16 All appliance tests, final inspection and fine-tuning was performed using the recommended fuels. Jolly Mec Caminetti S.p.A. is not responsible for malfunctions, breakdowns or problems due to the use of wood logs that are not recommended, as combustion parameters vary according to the quality of the fuel.
  • Page 17 06.2 RECOMMENDED FUELS WARNING WOOD QUALITY IS VERY IMPORTANT; PLEASE READ THIS SECTION CAREFULLY. The characteristics of fuel wood for stoves and fireplaces are defined by quality classes A1 and A2 set forth by UNI EN ISO 17225-5 standard. WOOD COMBUSTION Wood clean burning is a process that reflects the natural decomposition itself;...
  • Page 18 06.3 COMPONENTS The equipment is supplied on a pallet, in a cardboard box covered with heat shrink film and with the following additional components: • Installation, use and maintenance manual UniversalJolly EVO QUICK Fireplace pipe/collar Heat proof glove Legs (Optional) Combustion air pipe coupling for rear air intake (in alternative to 6 - optional) Combustion a ir p ipe c oupling f or l ower a ir intake (in alternative to 5 - optional) Damper for hot air regulation (Optional)
  • Page 19 Model UNIVERSALJOLLY EVO 62 QUICK UNIVERSALJOLLY EVO 68 QUICK UNIVERSALJOLLY EVO 80 QUICK UNIVERSALJOLLY EVO 90 QUICK Model UNIVERSALJOLLY EVO 62 QUICK 5S 1418 UNIVERSALJOLLY EVO 68 QUICK 5S 1486 UNIVERSALJOLLY EVO 80 QUICK 5S 1511 UNIVERSALJOLLY EVO 90 QUICK CT...
  • Page 20 Modello CORNER QUICK 62 DX 5S 1389 CORNER QUICK 62 SX 5S 1389 CORNER QUICK 80 DX 5S 1479 CORNER QUICK 80 SX 5S 1479...
  • Page 21 CHAP.07 POSITIONING AND CONNECTIONS FOR THE INSTALLER WARNING The device must be installed and used in accordance with all local and national laws and EC Regulations. The installer is directly liable for all electrical system parts, generation hook-up to the system, ventilation and the fume exhaust system.
  • Page 22 For appliances where exhausts that are not coaxial to the flue gas outlet must be reached, changes in direction must be achieved by using 45° open elbows or an elbow with a direction no greater than 90° to the vertical (Fig. 1). The use of counter slope elements is forbidden.The flue union must have a constant section and allow soot to be collected and swept away.
  • Page 23 07.3 ASSEMBLY SEQUENCE Install the fireplace as follows: The insert can be installed on an existing fireplace or built ex novo with a suitable casing. A) INSTALLATION IN A PRE-EXISTING FIREPLACE Prepare the air intakes as indicated below according to the type of chosen combustion air intake. 1a) Combustion air intake from inside the installation room.
  • Page 24 Repeat the same procedure for the opposite side of the fireplace (Fig. 9-10-11-12). Fig. 9 Fig. 10 Fig. 11 Fig. 12 b4) Prepare the opening communicating directly with the external environment (minimum Ø100 mm for 68 QUICK, 80 QUICK, 90 QUICK, 62 QUICK 5S, 68 QUICK 5S, 80 QUICK 5S, CORNER 62 5S models - minimum Ø80 mm for 62 QUICK model) to be able to connect the pipe (minimum Ø100 mm for 68 QUICK, 80 QUICK, 90 QUICK, 62 QUICK 5S, 68 QUICK 5S, 80 QUICK 5S, CORNER 62 5S models - minimum Ø80 mm for 62 QUICK model) on one side to the collar (X) and on the other to the air intake directly communicating with the outside.
  • Page 25 c3) Unscrew screws L, M. Remove the plate (Y). Loosen screw N. Move the plate (Z) towards the bottom of the fireplace. Reposition the plate (Y) and tighten screws L, M, N (Fig. 7-8-9-10). Fig. 7 Fig. 8 Fig. 9 Fig. 10 Repeat the same procedure for the opposite side of the fireplace (Fig. 11-12-13-14).
  • Page 26 For Universaljolly EVO 90 QUICK CT models follow points number 5, 6, 9. For Universaljolly EVO 62 QUICK 5S, Universaljolly EVO 68 QUICK 5S, Universaljolly EVO 80 QUICK 5S follow points 7 - 9. For models QUICK CORNER 62 DX 5S, QUICK CORNER 62 SX 5S, QUICK CORNER 80 DX 5S, QUICK CORNER 80 SX 5S follow points number 8-9.
  • Page 27 Remove the fireplace deflector (A) - see chapter 08.5 (Fig. 1-2). Insert the fireplace into the pre-existing fireplace. To prevent heat loss, it is recommended to insulate the fireplace before fitting in place using the insulating material supplied. Position the collar on the fireplace, pulling down on bar C (Fig. 3-4).
  • Page 28 Insert the fireplace into the pre-existing fireplace. To prevent heat loss, it is recommended to insulate the fireplace before fitting in place using the insulating material supplied. Position the collar on the fireplace, pulling down on bar C (Fig. 1-2). Tighten screws A, B to secure the collar and then remove the precut bar C (Fig. 2-3).
  • Page 29 B) INSTALLATION IN A NEW FIREPLACE Assemble the legs on the fireplace. Remove the deflector (X) - see chapter 08.5 (Fig. 1-2). Lay the fireplace with the back on the ground (Fig. 3). Position the legs (Y) and tighten screws A, B, C, D, E, F (Fig. 4-5-6-7).
  • Page 30 Prepare the air intakes as indicated below according to the type of chosen combustion air intake. 2a) Combustion air intake from inside the installation room. Inside the installation room, provide an opening communicating with the external environment of at least 450 cm Fig. 1 2b) Combustion air intake from the rear of the fireplace and directly from the external environment by means of a duct with a minimum Ø100 mm (68 QUICK, 80 QUICK, 90 QUICK, 62 QUICK 5S, 68 QUICK 5S, 80 QUICK 5S, CORNER 62 5S model) at...
  • Page 31 Repeat the same procedure for the opposite side of the fireplace (Fig. 9-10-11-12). Fig. 9 Fig. 10 Fig. 11 Fig. 12 b4) Prepare the opening communicating directly with the external environment (minimum Ø100 mm for 68 QUICK, 80 QUICK, 90 QUICK, 62 QUICK 5S, 68 QUICK 5S, 80 QUICK 5S, CORNER 62 5S models - minimum Ø80 mm for 62 QUICK model) to be able to connect the pipe (minimum Ø100 mm for 68 QUICK, 80 QUICK, 90 QUICK, 62 QUICK 5S, 68 QUICK 5S, 80 QUICK 5S, CORNER 62 5S models - minimum Ø80 mm for 62 QUICK model) on one side to the collar (X) and on the other to the air intake directly communicating with the outside.
  • Page 32 c3) Unscrew screws L, M. Remove the plate (Y). Loosen screw N. Move the plate (Z) towards the bottom of the fireplace. Fig. 7 Fig. 8 Fig. 9 Fig. 10 Reposition the plate (Y) and tighten screws L, M, N (Fig. 7-8-9-10). Repeat the same procedure for the opposite side of the fireplace (Fig. 11-12-13-14).
  • Page 33 For Universaljolly EVO 90 QUICK CT models follow points number 5, 8, 9, 10. For Universaljolly EVO 62 QUICK 5S, Universaljolly EVO 68 QUICK 5S, Universaljolly EVO 80 QUICK 5S follow points 6, 8, 9, 10. For models QUICK CORNER 62 DX 5S, QUICK CORNER 62 SX 5S, QUICK CORNER 80 DX 5S, QUICK CORNER 80 SX 5S follow points number 7, 8, 9, 10.
  • Page 34 Fig. 6 Fig. 7 Fig. 5 For 62 QUICK 5S, 68 QUICK 5S, 80 QUICK 5S models Position the J.C.S., supplied with the fireplace, as indicated in the relevant AD320 manual supplied with the kit itself. Couple the two parts of the fume outlet pipe (a, b) using the clip supplied (c) (Fig.
  • Page 35 Position the chimney flue. Complete the connections of the ducting pipes if present (point 3) and of any combustion air ducting directly connected to the outside if the option in point 1b) or 1c) has been chosen. Create suitable openings in the casing for hot air release and circulation (minimum 400 cm MINIMUM CONVECTOR AIR INLET AND OUTLET SECTIONS Fig. 1 shows the minimum convector air inlet and outlet sections valid for all types of proposed installations:...
  • Page 36 07.4 INSTALLING THE CLADDING: PRECAUTIONS • Protection of domestic walls Installation of the fireplace near inflammable walls is only allowed if you maintain the distances indicated below, or if suitable protection is interposed. The surfaces such as the flooring, ceiling and walls of the home in the vicinity of the fireplace must be protected to prevent overheating.
  • Page 37 100 mm R Frontal air distance from inflammable material: 1700 mm Installation distances from flammable materials (models Universaljolly EVO 62 QUICK 5S, Universaljolly EVO 68 QUICK 5S, Universaljolly EVO 80 QUICK 5S) A Minimum air distance from inflammable side wall:...
  • Page 38 07.5 EXAMPLE OF AIR DUCTING TO OTHER ROOMS When installing the optional ventilation kit, hot air can be ducted by installing the pipes in the rooms to be heated. The return of air in the fireplace room must be guaranteed from every room in which the hot air arrives, through openings under the doors or vents (see Fig. 1-2).
  • Page 39 Dimension record time 2 dentical logs for a total of Lenght: 30 cm Fig. 7) 50 minutes Universaljolly EVO 62 QUICK 5S Position 4 ( (Fig. 4) QUICK CORNER 62 DX 5S 2,00 kg Side: 7x7 cm QUICK CORNER 62 SX 5S...
  • Page 40 Figure 3: position of the wood for the models Universaljolly EVO Fig. 3 62 QUICK, Universaljolly EVO 68 QUICK, Universaljolly EVO 80 QUICK, Universaljolly EVO 90 QUICK, Universaljolly EVO 90 QUICK Figure 4: position of the wood for the models Universaljolly EVO 62 Fig. 4 QUICK 5S, Universaljolly EVO 68 QUICK 5S, Universaljolly EVO 80 QUICK 5S, CORNER QUICK 62 DX 5S, CORNER QUICK 62...
  • Page 41 08.2 TIPS FOR THE USER • When the heating system is ducted, it is mandatory to leave at least one vent open to discharge the heat generated when the device is on. • The glass door must remain closed during wood combustion; it can only be opened to add more wood. •...
  • Page 42 Time between one cleaning and the next is strictly tied to fuel quality. The most suitable cleaning frequency can only be established a few days after use according to the actual amount of deposited residue and may vary from recommended Jolly Mec intervals. WARNING...
  • Page 43 08.4 EXTRAORDINARY MAINTENANCE We wish to remind you that the Extraordinary Maintenance to be carried out on this type of product must be done obligatorily every year by qualified maintenance personnel, in order to maintain its functionality, efficiency and comfort. For any further queries you may have, we invite you to contact the specialised Technical Service Center through your retailer.
  • Page 44 CHAP.09 FAULT DIAGNOSIS AND TROUBLESHOOTING 09.1 PROBLEMS WARNING In accordance with the laws in force on safety for electrical appliances, a specialised Technical Service Center or qualified personnel must obligatorily be contacted for all installation, maintenance or interventions that require access to electrical parts.
  • Page 45 COMMISSION REGULATION (EU) 2015/1185 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 62 QUICK Indirect heating functionality Direct heat output Indirect heat output...
  • Page 46 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 47 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 68 QUICK Indirect heating functionality Direct heat output Indirect heat output Reference standard EN 13229 Notified Body TÜV Rheinland Energy GmBH - NB 2456 - Am Grauen...
  • Page 48 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 49 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 80 QUICK Indirect heating functionality Direct heat output 11,0 Indirect heat output Reference standard EN 13229 Notified Body TÜV Rheinland Energy GmBH - NB 2456 - Am Grauen...
  • Page 50 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 51 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 90 QUICK Indirect heating functionality Direct heat output 10,6 Indirect heat output Reference standard EN 13229 Notified Body TÜV Rheinland Energy GmBH - NB 2456 - Am Grauen...
  • Page 52 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 53 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 90 QUICK CT Indirect heating functionality Direct heat output 11,0 Indirect heat output Reference standard...
  • Page 54 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 55 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 62 QUICK 5S Indirect heating functionality Direct heat output Indirect heat output Reference standard EN13229 Notified Body TÜV Rheinland Energy GmBH - NB 2456 - Am Grauen...
  • Page 56 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 57 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 68 QUICK 5S Indirect heating functionality 10,0 Direct heat output Indirect heat output Reference standard...
  • Page 58 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 59 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) Universaljolly EVO 80 QUICK 5S Indirect heating functionality 11,0 Direct heat output Indirect heat output Reference standard...
  • Page 60 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 61 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) QUICK CORNER 62 DX 5S Indirect heating functionality Direct heat output Indirect heat output Reference standard EN13229 Notified Body TÜV Rheinland Energy &...
  • Page 62 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 63 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) QUICK CORNER 62 SX 5S Indirect heating functionality Direct heat output Indirect heat output Reference standard EN13229 Notified Body TÜV Rheinland Energy &...
  • Page 64 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 65 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) QUICK CORNER 80 DX 5S Indirect heating functionality 11,0 Direct heat output Indirect heat output Reference standard...
  • Page 66 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 67 Information requirements for solid fuel local space heaters ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 Manufacturer JOLLY-MEC CAMINETTI SPA Trademark JOLLY MEC Model identifier(s) QUICK CORNER 80 SX 5S Indirect heating functionality Direct heat output 11,0 Indirect heat output Reference standard...
  • Page 68 Type of heat output/room temperature Auxiliary electricity consumption control (select one) Item Symbol Value Unit Item Value 0,000 Single stage heat output, no room At nominal heat output temperature control 0,000 Two or more manual stages, no At minimum heat room temperature control output 0,000...
  • Page 69 NOTES...
  • Page 70 NOTES...
  • Page 71 NOTES...
  • Page 72 Via S.Giuseppe 2 - 24060 Telgate (Bg) Italy Tel. +39 035.83.59.211 Fax +39 035.83.59.203 www.jolly-mec.it - info@jolly-mec.it...

This manual is also suitable for:

Universaljolly evo 68 quickUniversaljolly evo 80 quickUniversaljolly evo 90 quickUniversaljolly evo 62 quickUniversaljolly evo 68 quick 5sUniversaljolly evo 80 quick 5s ... Show all