Download Print this page
Napoleon Driftwood Luminous DLKTLV62L Installation Instructions Manual
Napoleon Driftwood Luminous DLKTLV62L Installation Instructions Manual

Napoleon Driftwood Luminous DLKTLV62L Installation Instructions Manual

Log placement for model tlv62l

Advertisement

Available languages

Available languages

Quick Links

DLKTLV62L Driftwood Luminous™ Log Placement
WARNING
!
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is different
in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours may
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
vary. During the initial use of the appliance, the colours will become more uniform as colour pigments burn in during the
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
heat-activated curing process.
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
more uniform as colour pigments burn in during the heat-activated curing process."
Insert only if
applicable ---->
Log Number
1
2
C
A
3
4
C
A
5
6
7
B
8
9
B
10
1.
Place Luminous™ Log #2 on Venturi #2. Ensure the locating hole is over locating stud F.
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com
For Model TLV62L
If applicable, insert the following statement:
note:
note:
Care must be taken when installing Luminous™ logs over the Venturi.
Log numbers are located on the bottom or back of the logs.
Luminous™ logs must fit over the Venturis and sit flat on the media tray.
Part Number
Venturi #1
Venturi #2
Venturi #1
Venturi #2
D
D
Burner Overview
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
1
1
D
Venturi #3
E
F
Venturi #3
E
F
G
G
2
2
F
F
2
Description
Venturi #4
Venturi #4
H
J
H
J
W415-4176 / B-0 / 05.24.24
I
I
Lab

Advertisement

loading
Need help?

Need help?

Do you have a question about the Driftwood Luminous DLKTLV62L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Napoleon Driftwood Luminous DLKTLV62L

  • Page 1 • The logs are fragile and should be handled with care. PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is different If applicable, insert the following statement: in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours may “PHAZER™...
  • Page 2 Place Luminous™ Log #3 on Venturi #3. Ensure the locating hole is over locating stud G. Place Luminous™ Log #4 onto Venturi #4. Ensure the locating hole is over locating stud H. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 3 Place Log #9 on the other side of the burner beside Luminous™ Log #4. Ensure the log does not cover any burner ports. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 4 Place the other Log #10 to the right of Luminous™ Log #4 in the back right corner of the appliance. Rest the opposite end on Luminous™ Log #4. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 5 If the rings won’t seat properly a small amount of high heat silicone between the gasket and the log can be applied. Silicone Gasket Log depression Steel Ring Silicone Gasket Steel Ring Log depression Silicone Gasket Steel Ring Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 6 6. Spread charcoal randomly on top of the other media. Do not cover the burner. 7. Spread vermiculite randomly on top of the other media. Do not cover the burner. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 7 BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.). est au-dessus du goujon de positionnement F. IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 8 Placer la bûche Luminous n°4 sur le Venturi n°4. S’assurer que le trou de positionnement est au-dessus du goujon de positionnement H. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 9 Placer la bûche n°9 de l’autre côté du brûleur à côté de la bûche Luminous n°4. Veillez à ce que la bûche ne recouvre aucun orifice du brûleur. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 10 Placez l’autre bûche n°10 à droite de la bûche Luminous n°4 dans le coin arrière droit de l’appareil. Posez l’extrémité opposée sur la bûche Luminous n°4. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 11 Silicone Gasket Steel Ring Log depression Dépression de la bûche Silicone Gasket Joint en silicone Steel Ring Anneau en acier Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...
  • Page 12 6. Étalez le charbon de bois au hasard sur les autres supports. Ne couvrez pas le brûleur. 7. Étalez de la vermiculite au hasard sur les autres supports. Ne couvrez pas le brûleur. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada · 1(866)820-8686 · www.napoleon.com W415-4176 / B-0 / 05.24.24...

This manual is also suitable for:

Woodland wlk