Related Manuals for Comelit ULTRA UT8010
Summary of Contents for Comelit ULTRA UT8010
- Page 1 PROGRAMMING MANUAL Programming manual for Art. UT8010-UT8020 ViP MANAGER 2.15.0 UT8020 / UT8010 fw. 1.7...
- Page 2 AUDIO/VIDEO MODULE FOR ULTRA ENTRANCE PANEL, VIP SYSTEM ULTRA: the new and most technologically advanced entrance panel offering maximum ease of installation. Twilight sensor for automatic nameplate backlighting switch-off during daylight hours. Omnidirectional digital microphone and dual loudspeaker for high-fidelity audio. Wide-angle colour video camera (field of vision: 160° horizontal, 90°...
- Page 3 SEARCHING FOR DEVICES TO CONFIGURE √ Start ViP Manager • From Options (1) / Local connections (2), select the network interface (3) to use (if several cards are installed, select the one to which the network cable has been connected). •...
- Page 4 DEVICE PARAMETERS The parameters used to configure art. UT8020 and UT8010 are listed below. After changing the parameters on a page, you need to press Write page before exiting the section of the parameters you are editing in order to save the changes to the device.
- Page 5 Start QR code scan: by pressing the button, the camera of the external unit enters the QR code acquisition mode in order to read the QR codes for the virtual keys shared by the user via Comelit App. Door opening via QR code is available in conjunction with apartment gateways 1456B, 1456 and 1456S.
- Page 6 MODULES Select module: select the additional modules you want to configure, the images show where the buttons are placed on the modules as configured. For functions, refer to the functions in the “Buttons” section INPUTS AND OUTPUTS OUTPUTS Functions associated with the “SE output”, “Relay output” and “Virtual output 1” outputs can be configured in this section •...
- Page 7 Start QR code scan: by pressing the button, the camera of the external unit enters the QR code acquisition mode in order to read the QR codes for the virtual keys shared by the user via Comelit App. Door opening via QR code is available in conjunction with apartment gateways 1456B, 1456 and 1456S.
- Page 8 GENERAL SETTINGS • Key tone: if enabled, it plays a confirmation tone when the key is pressed • Play call tones: if enabled, the external unit will play a tone to confirm that the call has been sent. • LED indication enable: if enabled, the indicator LEDs are activated (for more information on indicator LEDs, please refer to the installation manual).
- Page 9 Save & Exit button. • Video resolution: select the resolution of the video to be forwarded to internal units or the Comelit App. Selecting anything other than 320x240 (default) disables the multi-stream function. Internal units that do not support the selected format will not be able to play the video correctly.
- Page 10 • Sync mode ◊ Independent: the date and time are adjusted Locally (via the internal clock) or via the Comelit Cloud service; Local or Cloud can be selected using the “Sync type” parameter. ◊ Master: the module set as Master will sync the date and time on the devices set as Slave with its own.
- Page 11 NTP: the date and time are provided by an NTP (Network Time Protocol) service. The module must have an Internet connection for this type of syncing. ◊ Cloud: the date and time are provided by the Comelit Cloud service. The module must have an Internet connection for this type of syncing. •...
- Page 12 CALL LOG • Call log ◊ Enable call log: enables the call log function on the module. ◊ Call log server IP address: enter the IP address of the call log server art. 1459. ◊ Call log server port: enter the TCP port of call log server art. 1459. •...
- Page 13 MAINTENANCE RESTARTING THE DEVICE Select it Right-click on the description (a pop-up with 5 sub-menus will appear) Select “Restart device” or press the button on the menu bar RESETTING THE DEVICE To restore the factory settings of the module: Select it Right-click on the description (a pop-up with 5 sub-menus will appear) Select “Reset device”...
- Page 14 CERTIFIED MANAGEMENT SYSTEMS w w w . c o m e l i t g r o u p . c o m 2nd edition 08/2024 Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy code 2G40003371...
Need help?
Do you have a question about the ULTRA UT8010 and is the answer not in the manual?
Questions and answers