Setting The Storage Array Raid Controller Module Clocks - Dell PowerVault MD3200 Owner's Manual

Setting the Storage Array RAID Controller Module Clocks

You can use the Synchronize RAID Controller Module Clocks option to
synchronize the storage array RAID controller module clocks with the storage
management station. This option makes sure that the event timestamps
written by the RAID controller modules to the Event Log match the event
timestamps written to host log files. The RAID controller modules remain
available during synchronization.
To synchronize the RAID controller module clocks with the storage
management station:
1 In the AMW, select Storage Array Synchronize RAID Controller
Module Clocks.
2 If a password is set, in the Enter Password dialog, type the current
password for the storage array, and click Synchronize.
The RAID controller module clocks are synchronized with the storage
management station.
82
Configuration: About Your Storage Array