ZyXEL Communications ZYWALL 1050 Support Notes page 195

So we are going to complete the following settings.
1. Verify that the Internet access of ZyWALL 1050 is ok
2. Complete user/product/service registrations to activate the Content Filter service
3. Create Address objects for different user groups
4. Enable and configure the Content Filter feature on ZyWALL 1050
(1) Create two different filtering profiles for Sales and for Engineer departments
Enable external dynamic server
Configure Black and White lists
Control access of Java/ActiveX/Cookie/embedded proxy links
Define filtering profiles for different user group
Configure the warning message or warning page redirected when user access
the forbidden website
Configure ZyWALL 1050 step by step as described below.
Step1. Make sure the Internet access has been configured well from PC behind ZyWALL
1050.
By default, ge2 and ge3 of ZyWALL 1050's WAN ports will get the IP address from the ISP or
the DHCP server in front of ZyWALL 1050. Connect an Ethernet cable to ZyWALL 1050's
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL 1050 Support Notes
195